Hitachi, Ltd.
Hitachi, Ltd. CP-X3030 Projector Lamp 215W 5000 6000 Hrs
A replacement lamp module with a 215W UHP bulb rated for 5,000 to 6,000 hours, supplied in its housing for direct installation
- TypeUHP
- Wattage215W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 215W UHP lamp matches original brightness
- 5000 hours normal mode lamp life
- 6000 hours economy mode extends usage
- Manufactured to ISO9001 quality standards
Direct Replacement for Hitachi CP-X3030
This new projector lamp module fits the Hitachi CP-X3030 and uses the manufacturer model number DT01431. It arrives as a fully assembled bulb and housing so you can install it immediately without handling a bare bulb. The unit is built for classrooms, meeting rooms and home cinemas that need a drop-in replacement.
OEM Philips UHP 215W Bulb in ISO9001 Housing
The module contains a genuine Philips UHP bulb rated at 215W and is produced to ISO9001 quality standards. Every lamp is tested for beam performance, ignition, voltage, appearance, connections and run-time before it leaves the factory. The pre-assembled housing means no alignment tools or extra brackets are required during installation.
Restores 5000–6000 Hour Rated Life
Replacing a dim or expired lamp restores the projector to its rated 5000 hours in normal mode or 6000 hours in economy mode. The jump is worth it when image brightness has faded, colour accuracy has drifted or the projector warns that the lamp is near end of life. Not suited for users who need a bare bulb only or a different wattage specification.
Highlights
- Ready to install with pre-assembled bulb and housing
- 215W UHP lamp matches original brightness
- 5000 hours normal mode lamp life
- 6000 hours economy mode extends usage
- Manufactured to ISO9001 quality standards
Specifications
| Brand | HITACHI |
|---|---|
| Type | UHP |
| Wattage | 215W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
Does the CP-X3030 lamp use a standard UHP interface and what does the 215W rating mean for brightness?
The lamp is a UHP type rated at 215 watts, which sets the projector's light output level; the interface is the proprietary module connector used by Hitachi CP-X3030 projectors.
What are the physical dimensions and mounting points needed for the DT01431 housing to fit my CP-X3030?
The module is a complete bulb-and-housing assembly built to the exact DT01431 form factor, so it slides into the CP-X3030 lamp compartment and secures with the projector's original retaining screws.
How do I install the replacement lamp and which step do people often miss?
Power off and unplug the projector, let it cool, remove the lamp cover, unscrew the old module, insert the new DT01431 unit, tighten its screws, replace the cover, then reset the lamp timer in the menu — the reset is the step most often forgotten.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



