Hitachi, Ltd.
Hitachi, Ltd. CP-X301 Projector Lamp 220W 2000 Hrs
Replacement 220W lamp module with UHB bulb and housing delivers 2,000 hours of projection time
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- 220 W UHB bulb matches original brightness
- 2,000-hour rated life extends replacement interval
- Built to ISO 9001 quality standards
- Genuine OEM component ensures compatibility
Hitachi CP-X301 220W Projector Lamp
This new replacement lamp module fits Hitachi projectors using the CP-X301 or CPX301LAMP part number. It ships as a complete assembly with a Ushio UHB 220W bulb already seated in its housing, so no separate handling of the bare lamp is required. The unit is ready for immediate installation.
Rated 2,000 hours at 220 watts
The lamp life of 2,000 hours at 220W is the single figure that determines whether this module matches the projector's original specification. Verify that your device calls for a 220W lamp with this rated lifespan before ordering. Using a different wattage or life rating can affect brightness and reliability.
Direct-fit housing frees you from bulb alignment
Because the bulb comes pre-mounted in the correct housing, the module drops into the projector without the alignment steps a bare bulb demands. It suits owners who want a straightforward swap without specialised tools. It is not for users whose projector requires a different lamp code or wattage.
Highlights
- Ready-to-install module saves setup time
- 220 W UHB bulb matches original brightness
- 2,000-hour rated life extends replacement interval
- Built to ISO 9001 quality standards
- Genuine OEM component ensures compatibility
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 220W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How bright will the 220W bulb be once installed in my Hitachi projector?
The 220W UHB bulb delivers the original brightness specification for the CP-X301, matching the light output the projector was designed for.
Does the lamp use a proprietary connector or a standard interface for power and signalling?
The module plugs directly into the Hitachi CP-X301 lamp socket using the original manufacturer connector; no adapter is required.
Will the assembled housing fit the CP-X301 without modification?
Yes, the bulb comes pre-mounted in the correct housing (model DT00841) so it slides into the projector lamp bay exactly like the original unit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



