Hitachi, Ltd.
Hitachi, Ltd. CP-X260W Projector Lamp 165W 2000 Hrs
Replacement projector lamp module with a 165W UHB bulb rated for 2000 hours of use
- TypeProjector Lamp
- Wattage165W
- Lamp Life2,000 Hrs.
- OEM replacement module installs straight into the CP-X260W
- Philips UHB 165W bulb delivers specified brightness
- 2000-hour rated life supports extended use
- Manufactured to ISO 9001 quality standards
- Fully assembled housing removes separate bulb fitting
Replacement Lamp for Hitachi CP-X260W
This 165W projector lamp module fits the Hitachi CP-X260W model. It arrives as a fully assembled bulb and housing ready for immediate installation. The unit uses a Philips UHB bulb rated for 2000 hours of operation. It serves owners who need a direct replacement without sourcing separate components.
OEM-Grade Build and ISO9001 Manufacturing
Each lamp is produced to ISO9001 quality standards using genuine OEM parts from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita. The pre-assembled housing eliminates alignment steps during installation. Strict checks cover beam performance, ignition, voltage, connections and run-time before shipping. Buyers who prefer user-replaceable bare bulbs without a housing cannot use this module.
165W UHB Technology and 2000-Hour Rating
The ultra-high-pressure mercury lamp draws 165W and is rated for 2000 hours of typical use. Brightness will decline gradually as the lamp ages toward that limit. Projectors without compatible power supplies or ignition circuits for 165W UHB lamps cannot operate this module. Users needing longer intervals between replacements must choose a different projector platform.
Highlights
- OEM replacement module installs straight into the CP-X260W
- Philips UHB 165W bulb delivers specified brightness
- 2000-hour rated life supports extended use
- Manufactured to ISO 9001 quality standards
- Fully assembled housing removes separate bulb fitting
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 165W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What lamp type and wattage does the CP-X260W projector require?
The CP-X260W uses a UHB lamp rated at 165W, which sets the brightness and power draw for this model.
What is the exact module that fits the CP-X260W?
The replacement module is the Hitachi DT00751, a fully assembled bulb-and-housing unit made for this projector.
How is the DT00751 lamp installed, and what step is often missed?
Power off and cool the projector, open the lamp cover, remove the old module, insert the new DT00751, secure the screws, close the cover, then reset the lamp timer in the menu so the 2,000-hour counter starts correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



