We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hitachi, Ltd.

Hitachi, Ltd. CP-X255 DT00731 180W Projector Lamp

SKU CH-P6EW-B62F5

180 W replacement lamp module with assembled bulb and housing, rated for 2,000 hours of use

  • TypeProjector Lamp
  • Wattage180W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module saves setup time
  • 180 W UHB bulb matches original brightness
  • 2 000-hour rated life extends replacement interval
  • ISO 9001 manufacturing ensures consistent quality
  • Compatible with Hitachi CP-X255 projectors

CP-X255 180W Projector Lamp

This replacement lamp module is designed for the Hitachi CP-X255 projector and ships as a fully assembled bulb and housing for straightforward installation. It uses a 180W UHB lamp rated for 2,000 hours of operation.

Replaces original DT00731 lamp

It directly substitutes the factory lamp module supplied with the CP-X255, so the upgrade is worthwhile when the existing lamp reaches its rated life or shows dimming and colour shift. The ready-to-fit housing removes the need to handle a bare bulb during the swap.

Sustained 2,000-hour rating

The lamp is manufactured to ISO 9001 quality standards and tested for beam performance, ignition voltage and run-time consistency, supporting steady output over the full 2,000-hour cycle rather than only a brief initial peak.

Highlights

  • Ready-to-install module saves setup time
  • 180 W UHB bulb matches original brightness
  • 2 000-hour rated life extends replacement interval
  • ISO 9001 manufacturing ensures consistent quality
  • Compatible with Hitachi CP-X255 projectors

Specifications

TypeProjector Lamp
Wattage180W
Lamp Life2,000 Hrs.

Questions about this item

Will the DT00731 lamp module fit my Hitachi CP-X255 projector without extra brackets?

The lamp is a fully assembled bulb and housing made for the CP-X255, so it slides into the projector's lamp compartment without additional mounting hardware.

What is the installation step people often miss when fitting the CP-X255 lamp?

After inserting the module, the lamp cover must be secured before the projector will power on; an open cover triggers the safety interlock.

How many hours of use can I expect before the 180W UHB bulb needs replacing?

The lamp is rated for 2,000 hours of operation; after that the bulb should be swapped for a new module to maintain brightness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.