We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi CP-X2520 projector lamp module DT01141 with 200W UHP bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. CP-X2520 Projector Lamp DT01141 200W

SKU CH-A8FK-AG4ZF

A 200 W UHP replacement lamp module with housing, rated for 3,000 hours normal or 4,000 hours economy use

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
  • Ready to install with pre-assembled housing
  • 200W Philips UHP bulb powers bright projection
  • 3000 hours normal mode lamp life
  • 4000 hours economy mode extends use
  • Manufactured to ISO 9001 quality standards

Replacement Lamp for Hitachi CP-X2520

This new 200W projector lamp module ships as a fully assembled bulb and housing unit. It matches the Hitachi part number DT01141 and is designed for direct installation in the CP-X2520 projector. The module uses a Philips UHP bulb manufactured to ISO 9001 quality standards. Buyers needing lamps for other projector models cannot use this part.

Rated Output and Lamp Life

The lamp operates at 200 watts and delivers 3000 hours of life in normal mode or 4000 hours in economy mode. These figures reflect the bulb manufacturer specifications for brightness and longevity under typical operating conditions. Actual runtime will vary with usage patterns and environmental factors. The unit contains no user-serviceable components beyond the complete module swap.

Deciding Specification — 200W UHP Bulb

The single specification that determines compatibility is the 200W UHP bulb type matched to the CP-X2520 chassis. Only projectors designed for this exact wattage and bulb technology will accept the module safely. Verify the projector model number before purchase to avoid mismatched electrical or mechanical interfaces.

Highlights

  • Ready to install with pre-assembled housing
  • 200W Philips UHP bulb powers bright projection
  • 3000 hours normal mode lamp life
  • 4000 hours economy mode extends use
  • Manufactured to ISO 9001 quality standards

Specifications

TypeProjector Lamp
Wattage200W
Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.

Questions about this item

How do I install the DT01141 lamp module in my CP-X2520, and which step is most often missed?

The module arrives fully assembled with housing, so you only open the projector lamp door, remove the old unit, slide the new one in until the connector seats firmly, close the door, then reset the lamp timer in the projector menu — the timer reset is the step most people forget.

What maintenance or replacement will the DT01141 lamp need after extended use?

The Philips UHP 200W bulb inside is rated for 3000 hours in normal mode or 4000 hours in economy mode; once brightness drops near those limits you replace the entire lamp module again, as the bulb is not user-serviceable.

What is the first limit that appears when running the DT01141 continuously for long sessions?

The 200W lamp reaches its rated life of 3000 hours (normal) or 4000 hours (economy) first; sustained operation simply counts toward that hour limit rather than hitting a thermal or power ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.