We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare Philips UHP projector bulb, no housing

Hitachi, Ltd.

Hitachi, Ltd. CP-X2510EZ 210-140W 0.8 E19.4 DLP replacement lamp

SKU CH-9JD6-8E3DY

Genuine Philips UHP bare bulb rated 210-140W with .8 arc and E19.4 reflector for Hitachi CP-X2510EZ projector

  • TypeProjector Lamps
  • Genuine OEM Philips UHP bulb ensures reliable ignition and colour accuracy
  • 210 W power range with 0.8 mm arc delivers high luminance for the CP-X2510EZ
  • E19.4 reflector shape matches original cooling design to prevent overheating
  • Superior light output and uniform distribution maximise projected image quality
  • Long lamp life rated to 140 W minimum reduces maintenance frequency

Exact projector match

This genuine OEM Philips UHP bare bulb is engineered specifically for the Hitachi CP-X2510EZ projector. It replicates the original ignition parameters and cooling requirements to prevent overheating, flickering, colour errors or premature shattering. The lamp delivers the precise luminance and uniform light distribution specified by the manufacturer. It restores factory image quality without requiring a cage assembly.

For CP-X2510EZ owners only

Buyers with a Hitachi CP-X2510EZ projector needing a bare bulb replacement will find the correct 210W to 140W power range and 0.8 mm arc length. This unit is not for users who require a complete lamp module with housing included. It also does not suit any other projector model or brand due to the specific E19.4 reflector shape and driving mode. Installers must be comfortable fitting a bare bulb into an existing cage.

Philips UHP 210-140W 0.8 E19.4 bulb

The single specification that decides fitment is the Philips UHP bare bulb rated at 210W to 140W with a 0.8 mm arc and E19.4 reflector shape. These exact electrical and optical parameters match the Hitachi CP-X2510EZ requirements for cooling, ignition and luminance. Using a bulb with different power range, arc length or reflector geometry will cause overheating, flickering or incorrect colours. This specific combination ensures reliable operation.

Highlights

  • Genuine OEM Philips UHP bulb ensures reliable ignition and colour accuracy
  • 210 W power range with 0.8 mm arc delivers high luminance for the CP-X2510EZ
  • E19.4 reflector shape matches original cooling design to prevent overheating
  • Superior light output and uniform distribution maximise projected image quality
  • Long lamp life rated to 140 W minimum reduces maintenance frequency

Specifications

BrandHitachi
TypeProjector Lamps

Questions about this item

How do I install the bare bulb into my existing cage, and what is the common mistake?

Remove the old UHP bulb from the cage, align the new 0.8 mm arc gap Philips UHP 210-140W E19.4 bulb precisely in the reflector, and secure it without touching the quartz envelope; the step most people get wrong is handling the bulb with bare fingers, which causes hot spots and premature failure.

What maintenance or replacement will this lamp need later?

The bare UHP bulb itself is the only replaceable component; when brightness drops or the projector indicates end of life, purchase another genuine Philips 210-140W 0.8 E19.4 bulb and repeat the cage reinstallation.

What limit appears first during sustained use of this lamp?

The 210 W power ceiling is reached first; the projector's ballast drives the UHP bulb at up to 210 W, and sustained operation at that level determines lumen decay rate and eventual end of usable life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.