We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi CP-WX401 projector lamp module with 220W UHB bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. CP-WX401 Projector Lamp 220W 2000 Hrs

SKU CH-5VS5-V7Z7G

Genuine compatible 220W replacement lamp module with 2,000-hour rated life for Hitachi CP-WX401 projectors

  • TypeProjector Lamp
  • Wattage220W
  • Lamp Life2,000 Hrs.
  • Genuine replacement lamp installs instantly in CP-WX401 projectors
  • 220 W UHB bulb delivers specified brightness for the model
  • Rated 2 000 hours of projection time before replacement
  • Manufactured to ISO 9001 quality standards for reliable operation
  • Supplied as complete bulb-and-housing module for tool-free fitting

Genuine replacement lamp for CP-WX401

This 220W UHB lamp module fits the Hitachi CP-WX401 projector and arrives fully assembled in its housing for direct installation. It is intended for owners who need a new light source after the original reaches end of life. The lamp is supplied new and ready to use.

Rated 2000 hours at 220W

The lamp is specified for 2,000 hours of operation at its rated 220W power draw. Normal use will follow this thermal and electrical profile without additional cooling requirements beyond the projector's own design. No separate power or noise figures are provided.

Replaces the original DT00841 module

This unit replaces the factory lamp identified as DT00841 when brightness drops or the hour counter signals replacement. The jump is worth it when the existing lamp has reached or exceeded its 2,000-hour rating and image quality has degraded. It is not suited for projectors other than the CP-WX401.

Highlights

  • Genuine replacement lamp installs instantly in CP-WX401 projectors
  • 220 W UHB bulb delivers specified brightness for the model
  • Rated 2 000 hours of projection time before replacement
  • Manufactured to ISO 9001 quality standards for reliable operation
  • Supplied as complete bulb-and-housing module for tool-free fitting

Specifications

TypeProjector Lamp
Wattage220W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the CP-WX401 lamp module and what step is often missed?

The DT00841 module arrives fully assembled with the 220W UHB bulb inside its housing; open the projector lamp door, remove the old unit, insert the new one until it clicks, then reset the lamp-hour counter in the menu — skipping the counter reset is the step most people forget.

What maintenance or replacement will the lamp need later?

The 220W UHB bulb is rated for 2000 hours; once the projector warns that lamp life is exhausted, replace the entire DT00841 module — no separate filter or bulb-only change is required.

What limit appears first during sustained use?

The 2000-hour rated lamp life is the primary limit; after those hours the 220W UHB bulb reaches end of life and the projector will prompt for a new DT00841 module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.