Hitachi, Ltd.
Hitachi, Ltd. CP-TW3003 Projector Lamp 250W UHP 3000-5000 Hrs
Replacement lamp module with 250 W UHP bulb lasting 3000 to 5000 hours
- TypeUHP
- Wattage250W
- Lamp Life3,000 (Normal) - 5,000 (Economy) Hrs.
- Ready-to-install module with Philips 250W UHP bulb
- 3000 hours normal or 5000 hours economy lamp life
- Built to ISO 9001 quality standards
- Tested for beam performance, ignition and voltage
- OEM replacement for Hitachi DT01411 projectors
Ready-to-install replacement lamp
The Hitachi CP-TW3003 module arrives as a complete bulb-and-housing assembly matched to Hitachi model DT01411. It is built for owners of compatible Hitachi projectors who need a direct swap without extra tools or alignment steps. Buyers who require a bare bulb only or a different wattage should look elsewhere.
UHP 250W lamp with dual-life ratings
The Philips UHP 250W bulb delivers 3,000 hours in normal mode and 5,000 hours in economy mode. Each unit is tested for beam performance, ignition voltage, connections and run-time under ISO9001 quality controls. Projectors without an economy setting or users who run exclusively at full brightness will not reach the longer figure.
Fits the original housing footprint
Because the lamp ships fully assembled in the correct housing, it occupies the same space as the factory module and uses the existing power connector. No adapter cables, mounting brackets or firmware updates are needed. Installers who need a different connector pinout or a higher-wattage option must choose another part.
Highlights
- Ready-to-install module with Philips 250W UHP bulb
- 3000 hours normal or 5000 hours economy lamp life
- Built to ISO 9001 quality standards
- Tested for beam performance, ignition and voltage
- OEM replacement for Hitachi DT01411 projectors
Specifications
| Brand | HITACHI |
|---|---|
| Type | UHP |
| Wattage | 250W |
| Lamp Life | 3,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
How do I install the DT01411 lamp module in my projector?
The module arrives fully assembled with the 250W Philips UHP bulb inside its housing, so you only need to open the projector lamp door, remove the old unit, insert the new one until it seats firmly, and close the door; the step most people miss is resetting the lamp-hour counter in the projector menu afterwards.
What maintenance will the CP-TW3003 lamp need during its life?
No routine maintenance is required for the lamp itself; when brightness drops after roughly 3000 hours in normal mode or 5000 hours in economy mode, you simply replace the entire module.
What is the first limit I will hit if I run the projector continuously in normal mode?
The 250W UHP bulb is rated for 3000 hours in normal mode, so lamp-end-of-life is the first hard limit you will reach under sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



