Hitachi, Ltd.
Hitachi, Ltd. CP-SX1350W Projector Lamp 310W 2000 Hrs
310W replacement lamp module with UHB bulb and housing, rated for 2000 hours
- TypeProjector Lamp
- Wattage310W
- Lamp Life2,000 Hrs.
- Genuine Ushio UHB bulb ensures reliable brightness
- 310 W output matches original projector specification
- 2,000-hour lamp life supports extended use
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
Ready-to-install lamp module
The Hitachi CP-SX1350W replacement lamp arrives as a fully assembled 310W bulb inside its housing so you can swap it straight into the projector without handling a bare burner. The module uses a genuine Ushio UHB lamp built to ISO 9001 quality checks for beam performance, ignition, voltage and run-time. Two thousand hours of rated life give a clear replacement interval for classroom or meeting-room use.
Simple swap, watch the version
Installation is a matter of opening the lamp door, releasing the old module and sliding the new one home until it seats firmly. The only common issue is ordering the wrong version — four variants exist including three OEM sources and a compatible build, so match the DT00601 part code on your existing unit before ordering. Resetting the projector’s hour counter after the swap prevents premature warning messages.
Check projector model and lamp code
Verify that your projector is the CP-SX1350W and that the current lamp bears the DT00601 designation before purchase. The lamp door must open freely and the housing contacts should be clean and undamaged. No other projector models or lamp codes are supported by this module.
Highlights
- Genuine Ushio UHB bulb ensures reliable brightness
- 310 W output matches original projector specification
- 2,000-hour lamp life supports extended use
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 310W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I confirm the new 310W UHB lamp is operating correctly after installation?
Reset the projector's lamp-hour counter, then verify the on-screen timer begins counting from zero and the image reaches full brightness without flicker.
Does the DT00601 module ship with the bulb already seated in the housing, or must I buy a separate bare bulb?
The module arrives as a fully assembled 310W UHB bulb inside its housing, so no separate bulb purchase is required.
Which of the four available versions — three OEM and one compatible — should I select for the CP-SX1350W?
Choose the OEM version from the original bulb manufacturer for exact factory performance, or the compatible version for a lower-cost alternative built with genuine OEM parts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



