Hitachi, Ltd.
Hitachi, Ltd. CP-S960 Projector Lamp 190W 2000 Hrs
Replacement 190 W projector lamp module with 2,000-hour rated life, supplied as a complete housing for direct installation
- TypeProjector Lamp
- Wattage190W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- 190W UHP lamp delivers specified brightness
- 2000-hour rated life supports extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi CP-S960 projector model
Hitachi CP-S960 Replacement Lamp
The Hitachi CP-S960 is a 190W UHP projector lamp module supplied as a complete bulb-and-housing assembly. It is designed for owners of compatible Hitachi projectors who need a ready-to-install replacement when the original lamp reaches end of life.
Replaces Worn Original Lamp
This module replaces the factory lamp inside the projector, restoring brightness and colour accuracy lost through normal ageing. The jump is worth it when the existing lamp has accumulated roughly 2,000 hours of use or when the projector warns that replacement is required.
2,000-Hour Service Limit
The lamp is rated for 2,000 hours of operation under standard conditions. Actual lifespan varies with usage patterns, power cycles and environmental factors, so heavy daily use will reach the limit sooner than occasional presentation sessions.
Highlights
- Ready to install with pre-assembled bulb and housing
- 190W UHP lamp delivers specified brightness
- 2000-hour rated life supports extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Hitachi CP-S960 projector model
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 190W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Does the DT00231 lamp module include the housing so I can slot it straight into my CP-S960 projector?
Yes, the DT00231 module ships as a fully assembled 190W UHP bulb inside its housing, ready to install without extra parts.
What is the correct way to seat the DT00231 lamp module, and what step do installers often miss?
Power off and unplug the projector, let it cool, remove the lamp cover, slide the DT00231 module in until it clicks, then secure the retaining screws before replacing the cover.
When should I plan to replace the DT00231 lamp based on its rated life?
The lamp is rated for 2,000 hours of use; replace it once the projector’s hour counter approaches that figure or when brightness noticeably drops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



