We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi CP-S385W projector lamp module with 200W UHB bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. CP-S385W Projector Lamp 200W 2000 Hrs

SKU CH-MP2E-HBK8J

A 200W replacement lamp module with housing delivers 2,000 hours of projection life for the CP-S385W projector

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with 200W UHB bulb
  • 2,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time
  • Genuine compatible replacement for Hitachi CP-S385W

Genuine replacement for CP-S385W

This projector lamp module fits the Hitachi CP-S385W model and arrives as a complete assembly with a 200W UHB bulb already seated in its housing. It is intended for owners who need a direct swap without sourcing a bare bulb or separate cage.

Pre-assembled housing and ISO9001 build

The unit ships fully assembled, so installation only requires opening the projector lamp door and sliding the module into place. Each version is manufactured to ISO9001 quality standards and tested for beam performance, ignition voltage, connections and rated run-time before dispatch.

Restores original brightness after 2000 hours

The lamp is rated for 2000 hours of operation, matching the factory specification for the CP-S385W. It replaces a dimmed or expired module and returns image output to its original level; it is not suited for projectors that require a different wattage or form factor.

Highlights

  • Ready-to-install module with 200W UHB bulb
  • 2,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time
  • Genuine compatible replacement for Hitachi CP-S385W

Specifications

TypeProjector Lamp
Wattage200W
Lamp Life2,000 Hrs.

Questions about this item

What lamp interface or standard does the CP-S385W module use, and what wattage does that limit it to?

The module uses the Hitachi CP-S385W socket and a UHB 200W bulb, so the projector drives it at 200 watts.

What physical parts are included, and what projector models will the housing fit?

The unit ships as a fully assembled bulb and housing designed for the Hitachi CP-S385W projector (Hitachi part number DT00431).

How is the lamp installed, and which step do people often get wrong?

Power off and cool the projector, open the lamp cover, remove the old module, insert the new assembly until it seats firmly, then close the cover and reset the lamp timer in the menu.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.