We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hitachi, Ltd.

Hitachi, Ltd. CP-S335 CPS335/345WLAMP 165W Projector Lamp DT00671

SKU CH-SPZ2-EJZ1F

165 W replacement projector lamp with 2 000-hour rated life for Hitachi CP-S335 and CPS335/345WLAMP models

  • TypeProjector Lamp
  • Wattage165W
  • Lamp Life2,000 Hrs.
  • Ready to install with pre-assembled bulb and housing
  • 165W Philips UHB bulb delivers specified brightness
  • 2,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition, voltage and run-time

Ready-to-install 165 W projector lamp module

This module pairs a new Philips UHB 165 W bulb with a complete housing so it fits straight into compatible Hitachi projectors. No extra assembly is required before installation.

Rated 2 000 hours at 165 W

The lamp is specified for 2 000 hours of operation at its rated 165 W power draw. Manufacturing follows ISO 9001 checks covering ignition, voltage, beam performance and run-time consistency.

Replaces Hitachi CP-S335 and CPS335/345WLAMP lamps

It serves as a direct replacement for the original DT00671 lamp used in those models. The jump is worthwhile when the existing lamp reaches its hour limit or shows reduced brightness.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • 165W Philips UHB bulb delivers specified brightness
  • 2,000-hour rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition, voltage and run-time

Specifications

TypeProjector Lamp
Wattage165W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the DT00671 lamp module, and which step do people get wrong?

Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide out the old module, insert the new DT00671 assembly until it seats firmly, tighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.

What maintenance or replacement will the CP-S335 lamp need later?

The 165 W UHB bulb is rated for 2,000 hours; after that the lamp module must be replaced — no user-serviceable parts inside.

What limit appears first during sustained use of this 165 W lamp?

The 2,000-hour rated life is the first hard limit; brightness drops and ignition becomes unreliable once that threshold is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.