We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi CP-S210W projector lamp module with 130W UHB bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. CP-S210W DT00581 130W projector lamp

SKU CH-B9M2-1QSD4

130 W CP-S210W replacement lamp module with UHB bulb and housing, rated for 2,000 hours

  • TypeProjector Lamp
  • Wattage130W
  • Lamp Life2,000 Hrs.
  • Genuine compatible replacement lamp fits Hitachi CP-S210W projectors
  • Pre-assembled bulb and housing enable quick tool-free installation
  • 130W UHB bulb delivers specified brightness for the model
  • Rated 2000 hours lamp life supports extended presentation use
  • Manufactured to ISO9001 quality standards for reliable performance

Genuine 130 W replacement lamp

The Hitachi CP-S210W DT00581 module ships as a complete 130 W UHB bulb inside its housing so it fits straight into the projector without extra assembly. It is intended for owners of compatible Hitachi projectors who need a direct drop-in replacement. Buyers who want a bare bulb without the housing or who need a different wattage should look elsewhere.

Thermal behaviour and power draw

The lamp operates at the rated 130 W and is specified for a 2 000-hour service life under normal projector use. Heat output and fan noise therefore follow the projector’s own cooling design rather than adding new thermal demands. No separate power adapter or voltage change is required beyond what the host projector already supplies.

Included housing and quality checks

Because the bulb comes pre-mounted in its housing, installation time is reduced to a simple module swap. Each unit is produced under ISO 9001 controls and tested for beam performance, ignition voltage, appearance, connections and run-time before it leaves the factory. The package contains only the lamp module itself; no tools, cables or software are bundled.

Highlights

  • Genuine compatible replacement lamp fits Hitachi CP-S210W projectors
  • Pre-assembled bulb and housing enable quick tool-free installation
  • 130W UHB bulb delivers specified brightness for the model
  • Rated 2000 hours lamp life supports extended presentation use
  • Manufactured to ISO9001 quality standards for reliable performance

Specifications

TypeProjector Lamp
Wattage130W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the CP-S210W lamp module and what step is often missed?

Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide out the old module, insert the new DT00581 housing until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.

What maintenance or replacement will this 130 W UHB lamp need later?

The lamp is rated for 2,000 hours of use; after that the bulb will dim and eventually fail, so the only required maintenance is replacing the entire module with a new CP-S210W unit when brightness drops or the projector signals end of life.

What limit appears first during sustained operation of this 130 W lamp?

The 2,000-hour rated lamp life is the primary limit; continuous running accelerates brightness decay and brings the end-of-life warning sooner than intermittent use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.