Hitachi, Ltd.
Hitachi, Ltd. CP-HX3280 Projector Lamp 200W 2000 Hrs
A new 200W replacement lamp module with a 2,000-hour rated life, supplied as a fully assembled bulb and housing for direct installation in the CP-HX3280 projector
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 Hrs.
- Ready-to-install module with Philips UHB 200W bulb
- 2000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM component from Philips Osram Ushio
- Compatible with Hitachi CP-HX3280 projector model
Direct replacement lamp for Hitachi CP-HX3280
This 200W lamp module ships as a complete bulb-and-housing assembly so it fits the projector without extra parts. It is intended for owners of the CP-HX3280 model who need a new light source. The unit arrives ready to install and restores the projector to full brightness.
Rated 200W with 2000-hour lamp life
The single specification that determines compatibility is the 200W UHB bulb rated for 2000 hours of operation. Matching both the wattage and the hour rating ensures the projector runs at its designed light output and thermal profile. A different wattage or life rating would not suit this model.
Fits the CP-HX3280 housing without modification
Because the bulb comes pre-mounted in its housing, the module slides into the projector lamp compartment and locks in place. No separate bulb handling or alignment is required, which reduces installation time and avoids contact with the glass envelope. The assembly draws the same power and uses the same cooling path as the original lamp.
Highlights
- Ready-to-install module with Philips UHB 200W bulb
- 2000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM component from Philips Osram Ushio
- Compatible with Hitachi CP-HX3280 projector model
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How bright will the 200W lamp be in my CP-HX3280 projector?
The 200W UHB bulb restores the original brightness specified for the CP-HX3280, delivering the same light output as the factory lamp when the projector is run in its normal mode.
Does the DT00757 module use a proprietary connector or a standard socket?
It is a complete OEM replacement module with the exact housing and connector designed for the CP-HX3280, so it plugs straight into the projector without adapters.
Will the assembled housing fit through the CP-HX3280 lamp door without modification?
Yes, the bulb comes pre-mounted in the correct housing for the CP-HX3280, matching the original dimensions so the lamp door closes normally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



