We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Hitachi CP-HX2175 projector lamp module with 180W bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. CP-HX2175 Projector Lamp 180W 2000 Hrs

SKU CH-Q14H-PSTTX

A ready-to-install 180 W replacement lamp module rated for 2,000 hours of operation

  • TypeProjector Lamp
  • Wattage180W
  • Lamp Life2,000 Hrs.
  • Genuine Philips UHB bulb ensures reliable brightness
  • 180W power rating matches original projector specification
  • 2,000-hour lamp life supports extended use
  • Pre-assembled housing allows quick tool-free installation
  • Manufactured to ISO 9001 quality standards

Ready-to-install 180 W lamp module

The CP-HX2175 is a complete replacement lamp assembly for compatible Hitachi projectors. It arrives with a new Philips UHB 180 W bulb already seated in its housing, so no separate bulb handling or alignment is required. Installation is a straightforward swap that restores full brightness in minutes.

OEM-grade build with ISO 9001 quality checks

Each unit is assembled to ISO 9001 standards using genuine Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita bulbs. The fixed housing ensures precise optical alignment and secure electrical connections every time. Rated lamp life is 2,000 hours under normal operating conditions.

Verify the exact projector model before ordering

This lamp fits projectors that specify the CP-HX2175 or DT00731 part number; other Hitachi models use different modules and will not accept it. Buyers who need a bare bulb without housing or a higher-wattage alternative should look for a different product. No tools beyond a screwdriver are typically required for the swap.

Highlights

  • Genuine Philips UHB bulb ensures reliable brightness
  • 180W power rating matches original projector specification
  • 2,000-hour lamp life supports extended use
  • Pre-assembled housing allows quick tool-free installation
  • Manufactured to ISO 9001 quality standards

Specifications

TypeProjector Lamp
Wattage180W
Lamp Life2,000 Hrs.

Questions about this item

Does the CP-HX2175 lamp module use a specific connector standard that limits brightness or ignition voltage?

The lamp uses the projector's proprietary socket; the 180W UHB bulb determines output and ignition requirements, not an external interface standard.

What physical dimensions or mounting points must match for the DT00731 housing to seat correctly in a Hitachi projector?

The pre-assembled housing mirrors the original DT00731 form factor, aligning with the projector's lamp cage rails and retaining screw positions.

How is the lamp module installed, and which step do users most often skip?

Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the module in until the connector seats, re-tighten screws, replace the cover, then reset the lamp timer in the menu.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.