We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hitachi CP-HS2000 projector lamp module with 160W UHB bulb in housing

Hitachi, Ltd.

Hitachi, Ltd. CP-HS2000 Projector Lamp 160W 2000 Hrs

SKU CH-0E29-RHDGY

Replacement lamp module with a 160 W UHB bulb and housing, rated for 2,000 hours of use

  • TypeProjector Lamp
  • Wattage160W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with bulb and housing
  • 160 W UHB lamp powers the projector
  • 2,000-hour rated life for extended use
  • Built to ISO 9001 quality standards
  • Hitachi OEM part number DT00331 ensures compatibility

Ready-to-install replacement lamp

This Hitachi CP-HS2000 projector lamp module ships with a 160W UHB bulb pre-mounted in its housing, so it fits straight into compatible Hitachi projectors without extra assembly. It is intended for owners of those projectors who need a new light source rated for 2,000 hours of use. Buyers who need a bare bulb without the housing or a different wattage should look elsewhere.

Simple swap with care on the glass

Installation consists of opening the projector lamp door, removing the old module and sliding this one in until it seats firmly; no tools are required beyond a screwdriver for the door. The main risk is touching the UHB bulb surface with bare fingers, which can create hot spots and shorten lamp life, so handle only the plastic housing and wear gloves if possible.

Confirm the exact projector model first

Before ordering, verify that your projector accepts the CP-HS2000 module, as Hitachi uses several different lamp designs across its range. The manufacturer part number DT00331 is printed on the original lamp label and on the projector’s lamp-door sticker; matching that number avoids receiving a module that will not fit or strike.

Highlights

  • Ready-to-install module with bulb and housing
  • 160 W UHB lamp powers the projector
  • 2,000-hour rated life for extended use
  • Built to ISO 9001 quality standards
  • Hitachi OEM part number DT00331 ensures compatibility

Specifications

TypeProjector Lamp
Wattage160W
Lamp Life2,000 Hrs.

Questions about this item

How do I verify the lamp is working correctly after installing it in my Hitachi projector?

After installation, power on the projector and check the lamp timer in the menu; it should reset to zero and the image should reach full brightness without flickering or colour shifts.

What components are included with the CP-HS2000 lamp and do I need any extra parts?

The module ships as a fully assembled unit with a new 160W UHB bulb inside its housing, so no separate bulb, housing or tools are required for installation.

Which version of the CP-HS2000 lamp should I choose among the OEM and compatible options?

Three OEM versions are offered — one from the original bulb maker, one sold by Hitachi, and one from an alternative OEM supplier — plus a lower-cost compatible version built with genuine OEM parts; all meet ISO9001 quality checks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.