Hitachi, Ltd.
Hitachi, Ltd. CP-HS1050 Projector Lamp 150W 2000 Hrs
Ready-to-install 150 W replacement lamp module rated for 2000 hours of use
- TypeProjector Lamp
- Wattage150W
- Lamp Life2,000 Hrs.
- Ready-to-install lamp module saves setup time
- Philips UHB 150W bulb delivers specified brightness
- 2000-hour rated life supports extended use
- OEM-sourced component matches original fit
- ISO 9001 manufacturing ensures consistent quality
Replacement lamp for Hitachi projectors
The Hitachi CP-HS1050 lamp module combines a 150W Philips UHB bulb with its housing in a single unit. It is manufactured to ISO 9001 quality standards and rated for 2,000 hours of operation. The assembly arrives ready for direct installation without separate bulb handling.
Practical limits of a 150W UHB lamp
Light output gradually declines over the 2,000 hour rated life, so image brightness will not stay constant indefinitely. The lamp generates significant heat during use and requires the projector's internal cooling system to function correctly. Sudden power loss while the lamp is hot can shorten its usable lifespan.
Compatibility checks before ordering
Verify that your Hitachi projector lists part number DT00461 or CP-HS1050 in its service manual or on the existing lamp label. Confirm the projector's lamp compartment accepts a pre-assembled module of this physical design. Ensure the projector's lamp-hour counter can be reset after installation to track the new module accurately.
Highlights
- Ready-to-install lamp module saves setup time
- Philips UHB 150W bulb delivers specified brightness
- 2000-hour rated life supports extended use
- OEM-sourced component matches original fit
- ISO 9001 manufacturing ensures consistent quality
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 150W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which version of the CP-HS1050 lamp should I choose?
Three OEM versions are available — direct from the original bulb manufacturer, sold by Hitachi, or from another OEM bulb maker — plus a compatible version built with genuine OEM parts.
What does the 150 W rating mean once the lamp is installed?
The projector will draw 150 watts to power the UHB bulb, delivering the brightness the unit was designed for.
What standard governs the lamp's manufacturing quality?
Each lamp is produced to ISO 9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



