Hitachi, Ltd.
Hitachi, Ltd. CP-EX250 Projector Lamp 215W 5000-6000 Hrs
A 215W replacement lamp module with a Philips UHP bulb and housing, rated for 5000 to 6000 hours
- TypeProjector Lamp
- Wattage215W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- OEM-ready module installs instantly with pre-assembled housing
- Philips UHP 215W bulb delivers reliable brightness
- 5000 to 6000 hour lamp life extends replacement cycles
- ISO 9001 manufacturing ensures consistent quality
- Compatible with Hitachi CP-EX250 projector model
Replacement Lamp for CP-EX250
This 215W lamp module is a direct replacement for the Hitachi CP-EX250 projector. It arrives fully assembled with bulb and housing so installation is straightforward. The unit suits education and business users who need to restore original brightness without projector downtime. It is not for owners of other projector models or for those seeking a bare bulb without housing.
Thermals and Power Draw
The lamp runs at 215 watts and is rated for 5,000 hours in normal mode or 6,000 hours in economy mode. Economy mode reduces light output to lower heat and extend service life. Actual runtime varies with usage patterns and ambient conditions. The module contains no user-serviceable cooling parts.
Build Integration
The assembly fits the CP-EX250 lamp cavity without tools and requires no firmware update or additional cables. It frees the projector from dimming or shutdown warnings caused by an aged lamp. Buyers who need a different wattage or a bare bulb for a custom housing cannot use this module.
Highlights
- OEM-ready module installs instantly with pre-assembled housing
- Philips UHP 215W bulb delivers reliable brightness
- 5000 to 6000 hour lamp life extends replacement cycles
- ISO 9001 manufacturing ensures consistent quality
- Compatible with Hitachi CP-EX250 projector model
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 215W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
How do I install the DT01433 lamp module, and which step do people often miss?
Power off and unplug the projector, wait for the lamp to cool, remove the lamp cover, loosen the securing screws, slide the old module out, insert the new DT01433 module until it seats firmly, tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the reset is the step most people forget.
What maintenance or replacement will the CP-EX250 lamp need later?
The 215 W UHP bulb is rated for 5 000 hours in Normal mode or 6 000 hours in Economy mode; after that the lamp must be replaced as a complete module. Clean the projector air filters regularly to avoid overheating and premature ageing.
What limit appears first during sustained use of the 215 W lamp?
The 5 000-hour Normal-mode rating (6 000 hours in Economy) is the first hard limit; running beyond it causes rapid brightness loss and eventual ignition failure, so plan replacement before reaching those hours.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



