Hitachi, Ltd.
Hitachi, Ltd. CP-EW302N 225W Projector Lamp
A ready-to-install 225 W UHP lamp module rated for 5,000 normal or 6,000 economy hours
- TypeUHP
- Wattage225W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- Ready-to-install module saves setup time
- Philips UHP 225W bulb delivers specified brightness
- 5,000 normal / 6,000 economy hours extends replacement interval
- ISO 9001 production ensures consistent quality
- OEM-compatible design fits Hitachi CP-EW302N projectors
Ready-to-install lamp module
The Hitachi CP-EW302N is a new 225W replacement projector lamp supplied as a fully assembled bulb and housing unit. It is intended for owners of compatible Hitachi projectors who need a drop-in module without separate bulb handling. The part corresponds to Hitachi model number DT01481 and uses a Philips UHP bulb.
225-watt UHP bulb
The single specification that determines fit is the 225W UHP lamp type, which must match the projector's original lamp rating. Buyers whose projectors require a different wattage or lamp technology cannot use this module.
Rated for 5,000 to 6,000 hours
In normal mode the lamp is rated for 5,000 hours of operation, while economy mode extends the rating to 6,000 hours. These figures reflect sustained output over the full service interval rather than initial brightness alone.
Highlights
- Ready-to-install module saves setup time
- Philips UHP 225W bulb delivers specified brightness
- 5,000 normal / 6,000 economy hours extends replacement interval
- ISO 9001 production ensures consistent quality
- OEM-compatible design fits Hitachi CP-EW302N projectors
Specifications
| Brand | HITACHI |
|---|---|
| Type | UHP |
| Wattage | 225W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
How bright will the 225W UHP bulb actually be once installed in my Hitachi projector?
The 225W UHP bulb delivers the same light output as the original lamp module, restoring full factory brightness for your Hitachi projector.
What projector models does the CP-EW302N lamp module fit?
This lamp module is built for Hitachi projectors that use the DT01481 part number, including the CP-EW302N series.
Does the lamp come pre-assembled in its housing for direct installation?
Yes, the bulb is already mounted in the housing so you can swap the module without handling the bare lamp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



