Hitachi, Ltd.
Hitachi, Ltd. CP-AW3019WNM Projector Lamp 250W
A 250W UHP replacement lamp module with 3,000 to 5,000 hour life for Hitachi projectors
- TypeUHP
- Wattage250W
- Lamp Life3,000 (Normal) - 5,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- Bright 250W UHP lamp for clear projection
- Long life up to 5,000 hours in economy mode
- Built to ISO 9001 quality standards
- Genuine Osram bulb ensures reliable performance
Ready-to-Install Lamp Module
The Hitachi CP-AW3019WNM projector lamp ships as a fully assembled 250W UHP bulb inside its housing so it drops straight into compatible Hitachi projectors without extra assembly. It is aimed at schools, meeting rooms and home-cinema owners who need a quick, reliable brightness restore. The module uses a genuine Osram UHP lamp built to ISO 9001 quality checks for beam performance and run-time.
Replaces Worn Original Lamp
Swap this module in when the existing lamp dims, flickers or hits its rated 3000-hour normal-life or 5000-hour economy-life limit. The jump is worth it if image brightness has fallen below usable levels or the projector warns of imminent lamp failure. Buyers who need higher lumen output than the original 250W design provides will not gain it from this direct replacement.
Fits Hitachi Projector Chassis
Installation requires only the projector’s standard lamp-door access and a few minutes of cool-down time; no special tools or firmware steps are mentioned. The self-contained housing protects the bulb during handling and keeps the optical path aligned. Operators who run projectors continuously should plan for the stated hour ratings and keep a spare module on hand to avoid downtime.
Highlights
- Ready to install with pre-assembled bulb and housing
- Bright 250W UHP lamp for clear projection
- Long life up to 5,000 hours in economy mode
- Built to ISO 9001 quality standards
- Genuine Osram bulb ensures reliable performance
Specifications
| Brand | HITACHI |
|---|---|
| Type | UHP |
| Wattage | 250W |
| Lamp Life | 3,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Will the CP-AW3019WNM lamp module fit my Hitachi projector without extra brackets?
The lamp ships as a fully assembled bulb-and-housing unit built to the DT01411 form factor, so it seats directly in the projector’s lamp bay with no additional hardware.
Which step do installers most often miss when fitting the DT01411 module?
After sliding the module in, the retaining screws must be tightened and the lamp-hour counter reset through the projector menu; skipping the reset leaves the old timer running.
How long before the Osram 250W UHP bulb needs replacing?
Expect roughly 3000 hours in normal mode or 5000 hours in economy mode before brightness drops to the point a new lamp module is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



