Hitachi, Ltd.
Hitachi, Ltd. CP-AW2505 Projector Lamp 225W DT01511
A new 225 W replacement lamp module with housing delivers up to 4,500 hours in normal mode or 6,000 hours in economy mode for Hitachi projectors
- TypeUHP
- Wattage225W
- Lamp Life4,500 (Normal) - 6,000 (Economy) Hrs.
- Ready to install with bulb and housing assembled
- 225 W UHP lamp delivers bright projection
- Up to 4,500 hours in normal mode
- Up to 6,000 hours in economy mode
- Built to ISO 9001 quality standards
Replacement lamp module for Hitachi CP-AW2505
This 225W UHP lamp module arrives fully assembled with bulb and housing, ready for direct installation in the Hitachi CP-AW2505 projector. It is intended for users whose original lamp has reached end of life and who need a drop-in replacement that restores factory brightness without additional assembly.
OEM-grade alternative to the original lamp
The module uses a Philips UHP 225W bulb and is manufactured to ISO 9001 quality standards, matching the original equipment specifications. Lamp life is rated at 4,500 hours in normal mode and 6,000 hours in economy mode, so the upgrade is worthwhile when the existing lamp dims or fails and a reliable, standards-compliant replacement is required.
Fits Hitachi CP-AW2505 projectors
No extra components or tools are needed; the complete housing slips into the projector's lamp compartment and connects to the existing power interface. The design frees the installer from handling a bare bulb and from aligning separate reflector parts, reducing downtime during maintenance.
Highlights
- Ready to install with bulb and housing assembled
- 225 W UHP lamp delivers bright projection
- Up to 4,500 hours in normal mode
- Up to 6,000 hours in economy mode
- Built to ISO 9001 quality standards
Specifications
| Brand | HITACHI |
|---|---|
| Type | UHP |
| Wattage | 225W |
| Lamp Life | 4,500 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
Which Hitachi projectors accept the DT01511 lamp module?
The DT01511 is built for the CP-AW2505 projector. It ships as a complete bulb-and-housing assembly that matches the original mechanical fit.
What is the correct way to install the CP-AW2505 lamp, and what step is often missed?
Power off and unplug the projector, let it cool, open the lamp door, remove the old module, insert the new DT01511 until it seats firmly, close the door, then reset the lamp-hour counter in the menu — skipping the reset is the common error.
When should I plan to replace the 225W UHP lamp based on its rated life?
Expect about 4,500 hours in normal mode or 6,000 hours in economy mode before brightness drops enough to warrant a new DT01511 module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



