Hitachi, Ltd.
Hitachi, Ltd. CP-A200 Projector Lamp 200W DT00893
A 200 W replacement lamp module with a pre-assembled Philips UHB bulb and housing, rated for 2,000 normal or 3,000 economy hours
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with 200W Philips UHB bulb
- Up to 3000 hours lamp life in economy mode
- 2000 hours rated life at normal brightness
- Manufactured under ISO9001 quality standards
- Genuine OEM replacement for Hitachi DT00893 projectors
Replacement Lamp for Hitachi CP-A200
This new 200W projector lamp module uses a genuine Philips UHB bulb inside a complete housing. It matches the original Hitachi part number DT00893 and is built to ISO9001 quality standards for reliable ignition and beam performance. The unit arrives fully assembled so it can be installed immediately without extra tools or alignment steps.
200W UHB Lamp Life
The lamp is rated for 2000 hours in normal mode and 3000 hours in economy mode. That single endurance figure decides whether the module matches the projector's designed maintenance cycle and expected brightness over time.
Fits Hitachi Projectors Using DT00893
The module drops straight into any Hitachi projector that calls for the DT00893 lamp code, freeing the owner from sourcing a bare bulb and separate cage. It is not suited for projectors that require a different wattage, connector layout or lamp-hour rating.
Highlights
- Ready-to-install module with 200W Philips UHB bulb
- Up to 3000 hours lamp life in economy mode
- 2000 hours rated life at normal brightness
- Manufactured under ISO9001 quality standards
- Genuine OEM replacement for Hitachi DT00893 projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What does the 200 W rating mean once the lamp is running in my projector?
It draws 200 watts of power and produces the brightness level the CP-A200 was designed for.
What interface or standard does the lamp use, and what does that cap in practice?
The lamp uses a proprietary Hitachi housing that locks into the CP-A200 chassis, so only this module fits.
What does the module physically need to fit or mount in the projector?
It arrives as a fully assembled bulb-and-housing unit that slides into the CP-A200 lamp compartment without extra tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



