We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Projector lamp module in black housing with connector

HITACHI

HITACHI DT01911 430W 9500 Lumens DLP Replacement Lamp

SKU CH-V068-TSSJA

Original 430 W lamp and housing rated for 9 500 lumens with 2 000-hour full-power life

  • TypeProject Lamp
  • Weight0.9990
  • Original lamp module fits Hitachi CP-HD9950 projectors
  • 430W output delivers 9500 lumens brightness
  • 2000-hour rating at full power extends to 4000 hours in eco mode
  • Jaspertronics OEM components ensure reliable performance
  • Includes housing for direct installation without extra parts

Compatible Hitachi Projector Models

This replacement lamp module fits Hitachi CP-HD9950, CP-WU9100, DHD1052-Q, DWU1052-Q and ImagePro 9009WU projectors. It is built for venues that need reliable brightness from a single 430W unit. The DT01911 part number ensures correct alignment and ignition in each listed model.

Thermals Noise and Power Draw

The lamp runs at 430W and produces 9500 lumens at full power. Rated life reaches 2000 hours in standard mode and 4000 hours in eco mode, reducing heat output and fan noise during extended sessions. Lower power draw in eco mode also eases demand on the projector cooling system.

Upgrade From Dim or Expired Lamps

This module replaces a lamp that has dimmed below usable brightness or reached its rated hour limit. The jump is worth it when image quality drops in large rooms or when scheduled maintenance calls for a fresh 2000-hour cycle. It is not for projectors outside the listed compatibility set.

Highlights

  • Original lamp module fits Hitachi CP-HD9950 projectors
  • 430W output delivers 9500 lumens brightness
  • 2000-hour rating at full power extends to 4000 hours in eco mode
  • Jaspertronics OEM components ensure reliable performance
  • Includes housing for direct installation without extra parts

Specifications

BrandJaspertronics
ModelDT01911
Part NumberDT01911
TypeProject Lamp
Weight0.9990

Questions about this item

How do I install the DT01911 lamp module in my CP-HD9950 projector, and what step is often missed?

Power off and unplug the projector, wait for it to cool completely, remove the lamp cover, unscrew the old module, slide in the new DT01911 housing until it seats firmly, replace screws and cover, then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.

What maintenance or replacement will the DT01911 lamp need after extended use?

The lamp is rated for 2,000 hours at full power or 4,000 hours in eco mode; once brightness drops noticeably or the projector signals end of life, replace the entire DT01911 lamp and housing module — no user-serviceable parts inside.

What limit appears first when running the DT01911 continuously at full 430W output?

The 2,000-hour full-power rating is the first hard limit; sustained 430W operation will reach this rated lifespan before any other constraint, after which brightness degrades and replacement is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.