HITACHI
HITACHI CP-WX3042WN 3LCD home theater projector 3000 ANSI
A 3LCD home-theatre projector delivering 3000 ANSI lumens brightness with 1280 x 800 native resolution and HDMI connectivity
- Type3LCD
- Native Resolution1024 x 768
- Brightness3000 - 3500 lumens
- Contrast Ratio400:1
- Bright 3000 ANSI lumens for clear images
- Native 1280 x 800 resolution shows sharp detail
- 3LCD engine delivers consistent colour performance
- HDMI with MHL connects phones and media players
- Network RJ-45 and RS-232 enable installed control
Home theater projector with 3LCD
The Hitachi CP-WX3042WN is a 3LCD home theater projector rated at 3000 ANSI lumens. It accepts HDMI and VGA inputs for media players, laptops or consoles. Native resolution is 1280 x 800 with 1080p signal support. The unit suits living-room film nights or classroom presentations where ambient light is moderate.
Thermals noise and power in normal use
Built-in speakers handle basic audio without external amplifiers. Connectivity includes RJ-45 LAN, RS-232 and USB ports for networked control or direct media playback. Crestron RoomView support allows centralised monitoring in installed environments. No fan-noise or power-draw figures are provided by the supplier.
Bundled accessories and software impact
The package includes a remote control, power cable and VGA cable for immediate setup. Geometric correction and colour adjustment menus help align the image on uneven surfaces. Closed captioning decoding assists accessibility compliance. Android, iOS, Linux and Windows compatibility enables wireless mirroring from common devices.
Highlights
- Bright 3000 ANSI lumens for clear images
- Native 1280 x 800 resolution shows sharp detail
- 3LCD engine delivers consistent colour performance
- HDMI with MHL connects phones and media players
- Network RJ-45 and RS-232 enable installed control
Specifications
| Type | 3LCD |
|---|---|
| Native Resolution | 1024 x 768 |
| Brightness | 3000 - 3500 lumens |
| Contrast Ratio | 400:1 |
Questions about this item
How do I install the CP-WX3042WN and which step is often missed?
Place the projector on a table or mount it for ceiling projection, connect power and an HDMI or VGA source, then run the geometric correction menu to square the image — many users skip that final alignment step.
What maintenance will the CP-WX3042WN need later?
Clean the air filter regularly and replace the lamp when brightness drops; the filter is accessed from the side panel and the lamp module from the top cover.
What limit appears first during long sessions on the CP-WX3042WN?
The 400:1 native contrast ratio means black levels lift noticeably after extended use, especially in rooms with ambient light.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



