Hiseeu 10M 32ft 12V DC Power Extension Cable 5.5mm x 2.1mm

12 V DC Extension for CCTV and LED

The Hiseeu cable adds 10 metres or 32 feet of reach between a 12 V power supply and a security camera or low-wattage LED fixture. It carries a straight male plug and a matching straight female socket, both built to the 5.5 mm outer-barrel and 2.1 mm inner-pin standard common in surveillance gear. Installers who need to bridge longer runs without splicing will find the ready-made length convenient. Buyers whose devices use a different barrel size or voltage cannot use this cable.

Fits inline between supply and device

The male end inserts into the existing power-adapter output while the female end accepts the camera or light power lead, so no tools or soldering are required. The extension frees the power brick from the camera mounting point, allowing the supply to stay indoors or in a weatherproof box while the cable runs through conduit or along eaves. It does not regulate voltage, so the source must already deliver a steady 12 V at the required current. Systems that need a locking connector or a right-angle plug will not mate with these straight barrels.

Maintains voltage over the full run

Copper conductors sized for low-wattage 12 V loads keep voltage drop small across the 10 metre span, so cameras stay powered during continuous recording. The PVC jacket resists outdoor exposure and routine handling without stiffening in cold weather. Because the cable has no active electronics, its behaviour is the same on hour one as on hour one thousand. Installations that draw higher current than the conductors are rated for will see increased drop and possible overheating.