HighZer0 Electronics
HighZer0 Electronics ANT09Z+BB+RPSMA+M 10 dBi Tri-Band WiFi Antenna Pair RP-SMA Black/Black
A pair of 10 dBi tri-band antennas covering 2.4 GHz, 5 GHz and 6 GHz for Wi-Fi 7, Wi-Fi 6E, WI-FI 6, Wi-Fi 5 and Wi-Fi 4 devices with RP-SMA male connectors
- TypeWiFi Router Antenna
- ColorBlack/Black
- FeaturesWi-Fi 7,Wi-Fi 6E,WI-FI 6,Wi-Fi 5,Wi-Fi 4,Bluetooth
- High gain 10 dBi extends wireless range and reduces dead zones
- Tri-band 2.4GHz 5GHz 6GHz supports Wi-Fi 7 Wi-Fi 6E WI-FI 6 Wi-Fi 5 Wi-Fi 4 Bluetooth
- RP-SMA male connector fits routers mesh systems modems WiFi cards USB adapters
- Adjustable external design allows optimal positioning for better reception and less interference
- Dual antenna pair enables MIMO performance for improved throughput
10 dBi Tri-Band Antenna Pair
The HighZer0 Electronics ANT09Z+BB+RPSMA+M is a pair of high-gain external antennas rated at 10 dBi. They replace standard low-gain antennas on routers, mesh systems, modems, Wi-Fi cards or USB adapters that use RP-SMA male connectors. The dual-pack enables MIMO performance for compatible devices.
Tri-band coverage across 2.4, 5 and 6 GHz
The antennas operate on the 2.4GHz, 5GHz and 6GHz frequency bands to support Wi-Fi 4, Wi-Fi 5, WI-FI 6, Wi-Fi 6E and Wi-Fi 7 networks. Adjustable positioning lets users aim each antenna for optimal reception and reduced interference from walls or furniture. RP-SMA male connectors have no centre pin and are not interchangeable with SMA male types.
Two antennas enable MIMO gains
The included pair provides the spatial diversity required for multi-stream MIMO operation on supported hardware. No additional cables, mounts or software are bundled with the antennas. Buyers who need SMA male connectors for IoT modules, SDR radios or industrial equipment cannot use this RP-SMA version.
Highlights
- High gain 10 dBi extends wireless range and reduces dead zones
- Tri-band 2.4GHz 5GHz 6GHz supports Wi-Fi 7 Wi-Fi 6E WI-FI 6 Wi-Fi 5 Wi-Fi 4 Bluetooth
- RP-SMA male connector fits routers mesh systems modems WiFi cards USB adapters
- Adjustable external design allows optimal positioning for better reception and less interference
- Dual antenna pair enables MIMO performance for improved throughput
Specifications
| Brand | HighZer0 Electronics |
|---|---|
| Model | ANT09Z+BB+RPSMA+M |
| Type | WiFi Router Antenna |
| Color | Black/Black |
| Features | Wi-Fi 7,Wi-Fi 6E,WI-FI 6,Wi-Fi 5,Wi-Fi 4,Bluetooth |
Questions about this item
How do I install the RP-SMA male connectors on my router without damaging the threads?
Align each RP-SMA male connector straight onto the router's female ports and hand-tighten clockwise until snug; the most common mistake is cross-threading by forcing the connector at an angle.
What maintenance will the adjustable hinge need over time?
The flexible joint may loosen after repeated repositioning; check the hinge tension every few months and gently tighten the base nut if the antenna no longer holds its angle.
At what point does the 10 dBi gain stop improving coverage under sustained load?
The narrow vertical beamwidth of a 10 dBi design limits benefit once client devices sit well below or above the antenna's main lobe, typically beyond a single floor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
