HighZer0 Electronics
HighZer0 Electronics ANT03Z+BY+RPSMA-M 10dBi Dual Band Wi-Fi Antennas 2 Pack
Two dual-band 10 dBi antennas with RP-SMA Male connectors cover 2.4–2.5 GHz and 4.9–5.9 GHz for Wi-Fi 4 through Wi-Fi 7 and Bluetooth devices
- TypeWiFi Router Antenna
- ColorBlack/Yellow
- FeaturesWi-Fi 7,Wi-Fi 6E,WI-FI 6,Wi-Fi 5,Wi-Fi 4,Bluetooth
- 10 dBi gain extends wireless range and improves signal stability
- Dual-band 2.4 GHz and 5 GHz coverage supports Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, Wi-Fi 5 and Wi-Fi 4
- RP-SMA male connector fits most routers, hotspots and wireless adapters
- Adjustable antenna positioning optimises reception for cameras, drones and FPV systems
- Two-antenna pack enables MIMO performance for higher throughput
Dual-band high-gain antennas for Wi-Fi 7
These two RP-SMA male antennas deliver 10 dBi omni-directional gain across 2.4–2.5 GHz and 4.9–5.9 GHz bands. They support Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, Wi-Fi 5, Wi-Fi 4 and Bluetooth devices. The adjustable design lets you position each antenna for optimal reception on routers, hotspots, PCIe adapters, security cameras or FPV equipment.
Replaces low-gain stock antennas for MIMO gain
Swapping factory whip antennas for this 10 dBi pair can extend range and reduce dead zones in larger rooms or areas with interference. The improvement is most noticeable when your device uses multiple spatial streams and you can orient the antennas separately. If your current antennas already provide full coverage at the desired distance, the upgrade will not add benefit.
Check RP-SMA male connector and clearance
Verify that your equipment has RP-SMA female ports with no centre pin; standard SMA male connectors look similar but are not interchangeable. Ensure there is enough physical space around each port to mount and angle the antennas without obstruction. No other specifications are required from the host device.
Highlights
- 10 dBi gain extends wireless range and improves signal stability
- Dual-band 2.4 GHz and 5 GHz coverage supports Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, Wi-Fi 5 and Wi-Fi 4
- RP-SMA male connector fits most routers, hotspots and wireless adapters
- Adjustable antenna positioning optimises reception for cameras, drones and FPV systems
- Two-antenna pack enables MIMO performance for higher throughput
Specifications
| Brand | HighZer0 Electronics |
|---|---|
| Model | ANT03Z+BY+RPSMA-M |
| Type | WiFi Router Antenna |
| Color | Black/Yellow |
| Features | Wi-Fi 7,Wi-Fi 6E,WI-FI 6,Wi-Fi 5,Wi-Fi 4,Bluetooth |
Questions about this item
What connector does the ANT03Z+BY+RPSMA-M antenna need on my device?
The antenna uses an RP-SMA Male connector, which has no centre pin; it fits the RP-SMA Female ports found on most routers, Wi-Fi cards and USB adapters.
How do I install the two antennas for MIMO and what step is often missed?
Screw both antennas hand-tight onto the RP-SMA ports, then angle them apart so their polarisation differs; the frequent error is leaving them parallel.
Will the antenna elements need replacement or periodic maintenance?
The antennas are passive elements with no moving parts or batteries, so they require no scheduled maintenance or element replacement under normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
