We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey rectangular RFID reader with integrated keypad, wall-mount form factor

HID Global Corporation

HID Global Corporation 5355AGK00 ProxPro RFID Reader with Keypad

SKU CH-5TM5-Y259G MPN 5355AGK00

A 125 kHz RFID proximity reader with integrated keypad, Wiegand output and a sealed enclosure rated for -30 °C to 65 °C indoor or outdoor use

  • TypeRFID Reader
  • Form FactorFixed
  • Power Supply10-28.5 VDC; Linear power supplies recommended. Reverse volt
  • Dimensions5.0" x 5.0" x 1.0"
  • Weight0.75 lb.
  • Operating Temperature-30º - 65º C
  • 125 kHz read range for medium-distance access
  • Integrated keypad adds PIN security layer
  • 10–28.5 VDC input with reverse-voltage protection
  • Sealed enclosure rated –30 °C to 65 °C outdoor
  • Tamper switch alerts on unauthorised removal

RFID Reader with Keypad

The HID ProxPro 5355AGK00 is a 125 kHz proximity reader with an integrated keypad for PIN entry. It suits access-control installations that need medium-range card reading and a weatherproof enclosure for indoor or outdoor mounting. A Wiegand interface and terminal strip simplify wiring to standard panels.

Sustained Operation

The unit operates from 10 to 28.5 VDC with reverse-voltage protection and draws low power during continuous use. Its sealed housing handles temperatures from -30 to 65 °C and humidity up to 95 % non-condensing. A tamper switch reports physical interference without interrupting the read cycle.

Installation Notes

Mounting follows a standard wall-switch footprint of 5.0 by 5.0 by 1.0 inches and weighs 0.75 lb. Linear power supplies are recommended; switching supplies may cause read-range instability. An optional glass-mount kit is required for mounting behind glass, and the beeper can be disabled for silent sites.

Highlights

  • 125 kHz read range for medium-distance access
  • Integrated keypad adds PIN security layer
  • 10–28.5 VDC input with reverse-voltage protection
  • Sealed enclosure rated –30 °C to 65 °C outdoor
  • Tamper switch alerts on unauthorised removal

Specifications

BrandHID
SeriesProxPro
Model5355
Part Number5355AGK00
TypeRFID Reader
Form FactorFixed
Power Supply10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.
Dimensions5.0" x 5.0" x 1.0"
Weight0.75 lb.
Operating Temperature-30º - 65º C
Humidity0-95% relative humidity non-condensing
Shipping weight0.20 kg
Package size193 × 142 × 41 mm

Questions about this item

How much power does the 5355AGK00 draw when it runs continuously on a 12 VDC supply?

The reader operates from 10 to 28.5 VDC with reverse-voltage protection; linear supplies are recommended for stable all-day operation.

Which host interface must my access controller provide for the Wiegand version of this reader?

The unit uses a Wiegand protocol interface compatible with standard access control panels.

Will the 125 kHz ProxPro read the same HID cards as an older Wiegand reader I already have installed?

It recognises card formats up to 84 bits and over 137 billion unique codes, matching common HID proximity credentials.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.