Hi Temp
Hi Temp R51-24X24X1-PS Welding Pad 24x24 32oz
A 24-inch by 24-inch fiberglass welding pad rated to 1,750 degrees Fahrenheit with a 32 oz/sq yd silicone coating and CSA certification
- TypeWelding Protection
- Withstands 1,750 °F for extreme heat protection
- Fibreglass with silicone coating resists chemicals and water
- Heavy-duty 32 oz/sq yd material handles tough jobs
- CSA certified and UL 1709 listed for safety assurance
- 24 × 24 inch pad covers large work areas
24" × 24" fiberglass welding pad
The Hi Temp R51-24X24X1-PS is a 24-inch by 24-inch fiberglass welding protection pad weighing 32 ounces per square yard. A silicone coating on the red fiberglass adds chemical and water resistance, and the material meets CSA and UL 1709 standards for heavy-duty use.
Suited for flat-plate shielding
This pad works well when a simple, grommet-free sheet is needed to protect surfaces from weld spatter, slag and grinding sparks. It is not intended for applications that require mechanical fastening points, curved forming or integrated eyelets for hanging.
0.82 mm thickness governs flexibility
At 0.82 millimetres thick, the pad balances pliability for tight workspaces with enough mass to block radiant heat up to its 1,750 °F rating, making thickness the key spec for deciding fit.
Highlights
- Withstands 1,750 °F for extreme heat protection
- Fibreglass with silicone coating resists chemicals and water
- Heavy-duty 32 oz/sq yd material handles tough jobs
- CSA certified and UL 1709 listed for safety assurance
- 24 × 24 inch pad covers large work areas
Specifications
| Brand | HI TEMP |
|---|---|
| Type | Welding Protection |
Questions about this item
Will the 24 x 24 inch welding pad sit flat on my existing steel workbench without damaging it?
The fiberglass pad with silicone coating measures 24 by 24 inches and weighs 32 oz per square yard, so it lies flat and protects the bench from spatter up to 1,750 °F.
How can I verify the pad is performing correctly during a weld?
The red silicone-coated fiberglass should remain intact and flexible at temperatures up to 1,750 °F; any charring, delamination or loss of water resistance indicates it is no longer fit for heavy-duty use.
Does the pad include grommets or fasteners, or must I buy them separately?
The pad has no grommet holes and no fasteners are included, so you will need to supply your own clamps, weights or mechanical fixings if you want to secure it in place.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
