Hi-Run
Hi-Run ASB1052 Trailer Tire 8x3.75 4-4 4 Ply
Trailer tire with steel wheel, 715 lb capacity at 50 PSI, 17.9 in outside diameter, 6.9 mm tread depth
- Height1.00
- Length1.00
- Weight13.50
- Width1.00
- Carries up to 715 lb with 4-ply strength
- 9 in outside diameter fits 8x3.75 wheel size
- 50 PSI inflation supports rated load capacity
- 9 mm tread depth on SU02 pattern for grip
- Steel wheel and rubber tyre construction weighs 13.5 lb
Hi-Run ASB1052 Trailer Tire 8x3.75 4-4 4 Ply
The Hi-Run ASB1052 is a trailer tyre and wheel assembly built on a steel wheel with a rubber tyre. It carries a load capacity of 715 lb at an inflation pressure of 50 PSI. The unit uses a 4-ply construction and the SU02 tread pattern for trailer service.
Suits single-axle utility trailers needing
Buyers who need a higher load rating or a different bolt pattern should look elsewhere. The 4-ply rating and 715 lb capacity limit use to lighter trailers. Those requiring a larger outside diameter or deeper tread depth will not be served by this specification.
Steel wheel and rubber tyre arrive mounted
The SU02 tread pattern provides the contact surface for towing stability. A tread depth of 6.9 mm and outside diameter of 17.9 inches define the rolling profile. No additional mounting hardware or valve stems are mentioned in the supplied data.
Highlights
- Carries up to 715 lb with 4-ply strength
- 9 in outside diameter fits 8x3.75 wheel size
- 50 PSI inflation supports rated load capacity
- 9 mm tread depth on SU02 pattern for grip
- Steel wheel and rubber tyre construction weighs 13.5 lb
Specifications
| Brand | HI-RUN |
|---|---|
| Height | 1.00 |
| Length | 1.00 |
| Weight | 13.50 |
| Width | 1.00 |
Questions about this item
What wheel bolt pattern does the 4-4 size require for the Hi-Run ASB1052 trailer tire?
The 4-4 designation means a 4-bolt pattern on a 4-inch bolt circle, so the trailer hub must match that exact pattern for the steel wheel to mount correctly.
Will the 17.9-inch outside diameter match my existing trailer tires?
Measure the current tires; if they also show a 17.9-inch outside diameter the new Hi-Run ASB1052 will sit at the same ride height and load rating.
What cold inflation pressure should I see on the gauge after installing the tire?
Inflate to 50 PSI cold; the sidewall moulding confirms this maximum pressure for the 715 lb weight capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



