Hetai Tech
Hetai Tech Wired Gaming Headset 40 mm 32 ohm 104 dB 3.5 mm USB LED Microphone Over Ear
Wired over-ear headset with 40 mm drivers, 32 ohm impedance and 104 dB sensitivity plus a noise-cancelling microphone and LED lighting powered by USB
- TypeHeadphone
- 40 mm drivers deliver clear, rich stereo sound
- 104 dB sensitivity provides loud, detailed audio
- 32 ohm impedance suits PC and console ports
- Noise-canceling mic cuts background noise for clear chat
- LED lighting activates via USB for gaming atmosphere
Wired 40 mm Gaming Headset
The Hetai Tech headset uses 40 mm neodymium drivers rated at 32 ohm impedance and 104 dB sensitivity. It connects through a 3.5 mm audio jack for stereo sound and a separate USB plug that powers the LED lighting on the earcups. An in-line control lets you adjust volume and mute the microphone instantly.
Analogue 3.5 mm and USB Power Limits
The 3.5 mm connection relies on the host device’s built-in audio codec, so output quality and maximum volume vary with the source. The USB link supplies only the LED illumination and does not carry digital audio or enable software features. The frequency response spans 20 Hz to 20 kHz within the stated tolerance.
Check Port Layout and Fit Before Buying
Verify that your computer or console has a 3.5 mm headphone socket and a free USB-A port positioned so both cables reach comfortably. The over-ear cups measure 17.5 cm by 19.5 cm by 8.0 cm, so confirm the headband adjustment range suits your head size. The boom microphone rotates but is not detachable.
Highlights
- 40 mm drivers deliver clear, rich stereo sound
- 104 dB sensitivity provides loud, detailed audio
- 32 ohm impedance suits PC and console ports
- Noise-canceling mic cuts background noise for clear chat
- LED lighting activates via USB for gaming atmosphere
Specifications
| Type | Headphone |
|---|
Questions about this item
Should I choose the 3.5 mm jack or the USB connection for the LED lights?
Use the 3.5 mm jack for audio and microphone; the USB plug only powers the LED lighting on the earcups.
What does the 104 dB sensitivity mean when I am actually gaming?
At 104 dB the 40 mm drivers produce loud, clear sound from typical controller or PC outputs without needing extra amplification.
How does the 3.5 mm interface limit microphone quality?
The analogue 3.5 mm mic connection caps quality to the sound card or controller preamp, so background noise rejection depends on that hardware.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



