Hetai Tech
Hetai Tech Micro USB to USB A OTG Adapter Silver 2.0
Connects Micro USB devices to USB-A ports with 480 Mbps data transfer and 2 Amp power support
- Connector TypeMicro USB to USB A
- Lightweight aluminium housing for easy portability
- Converts Micro USB ports to USB A female for Type C accessories
- Supports up to 480 Mbps data transfer and 2 A power output
- Compatible with Type C flash drives, fans and card readers
- Compact 3.3 cm size fits in any bag
Compact USB OTG adapter for legacy ports
This Hetai Tech adapter adds a USB Type-C female port to devices that only offer Micro USB or standard USB-A connectors. The aluminium alloy housing measures 3.3 cm and weighs very little, so it stays unobtrusive on a key ring or in a laptop bag. It targets users who need to connect modern Type-C flash drives, card readers or small fans to older computers, power banks or chargers without replacing those host devices.
Aluminium shell and everyday connectivity
The silver 2.0 version uses an aluminium alloy body that resists bending during repeated insertion and removal. Plugging the male Micro USB or USB-A end into a host instantly provides a Type-C female socket compatible with Type-C USB disks, fans, SD or TF card readers and male-to-male Type-C cables. No drivers are required; the adapter simply passes through the host controller’s existing USB 2.0 or 3.0 signalling.
Upgrades older hosts to Type-C without new hardware
The adapter replaces the need for dedicated legacy cables by turning any available Micro USB or USB-A port into a Type-C interface. It delivers up to 480 Mbps transfer speed and supports up to 2 A of power output for charging or data tasks, but it does not carry video signals. The jump is worthwhile when you have functional older gear and only need occasional Type-C peripheral access rather than a full platform refresh.
Highlights
- Lightweight aluminium housing for easy portability
- Converts Micro USB ports to USB A female for Type C accessories
- Supports up to 480 Mbps data transfer and 2 A power output
- Compatible with Type C flash drives, fans and card readers
- Compact 3.3 cm size fits in any bag
Specifications
| Connector Type | Micro USB to USB A |
|---|
Questions about this item
What USB standard does the Micro USB to USB A OTG adapter use, and what transfer speed does it cap at?
The adapter uses USB 2.0 and caps transfer speeds at 480 Mbps.
What physical dimensions and connector types must match for this adapter to fit?
It measures 3.3 cm and has a Micro USB male plug on one side and a USB A female port on the other.
How is the adapter installed, and what common mistake should be avoided?
Plug the Micro USB male end into the host device and the USB A device into the female port; do not expect video signal transmission as it is not supported.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



