Hetai Tech
Hetai Tech Micro USB to USB A 90° Elbow Cable 1 m
A 90° elbow Micro USB to USB-A cable with thick copper for fast charging and data sync, one metre long
- Connector TypeMicro USB to USB A
- 90° elbow design reduces strain on ports during use
- 1 m length reaches awkward sockets without excess cable
- Premium copper wiring supports fast charging and data sync
- Durable abrasion-resistant jacket withstands daily bending
- Compatible with Micro USB devices for charging and file transfer
Everyday charging cable
This Hetai Tech cable connects Micro USB devices to standard USB A ports with a 1 m length. The double 90° elbow design reduces strain on the connector during use. It supports charging, syncing and data transfer for phones, tablets and peripherals. The thickened copper wiring is intended to maintain reliable power delivery.
Thermals noise and power
The cable operates passively with no active cooling or power draw of its own. Heat generation is limited to normal resistive losses during charging sessions. No fan noise or electrical hum is produced by the cable assembly. Power consumption depends entirely on the connected charger and device.
Build and daily use
The abrasion resistant jacket and reinforced elbow joints protect against repeated bending. The L shaped connectors keep the cable close to the device, leaving ports accessible in tight spaces. A 1 m reach suits desktop, power bank or wall outlet setups. Five colour options help identify cables in multi device environments.
Highlights
- 90° elbow design reduces strain on ports during use
- 1 m length reaches awkward sockets without excess cable
- Premium copper wiring supports fast charging and data sync
- Durable abrasion-resistant jacket withstands daily bending
- Compatible with Micro USB devices for charging and file transfer
Specifications
| Connector Type | Micro USB to USB A |
|---|
Questions about this item
How do I plug in the 90° elbow cable without bending the Micro USB port?
Insert the Micro USB end straight into the device port first, then route the L‑shaped elbow along the device edge; forcing the angle before the connector is seated stresses the port.
What part of this 1 m cable wears out first with daily charging?
The Micro USB connector sees the most insert‑remove cycles; the reinforced elbow reduces cable fatigue, but the connector pins will eventually loosen.
When does the 1 m length start limiting fast charging speed?
Voltage drop over 1 m is minimal; the practical limit is the Micro USB interface itself, which caps current well before cable resistance becomes noticeable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



