We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium circuit board with eighteen LED emitters

Hetai Tech

Hetai Tech LED Par 18x18W RGBWA+UV Motherboard 108W 24V

SKU CH-M8RR-6NZXG

Replacement motherboard for 18×18 W RGBWA+UV LED par cans, 108 W at 24 V with 6- or 10-channel DMX control

  • Type6 VOLT
  • RGBWA+UV colour mixing expands creative options
  • 18 x 18 W LEDs deliver 108 W output
  • 24 V 6.5 A power draw suits professional rigs
  • DMX 6/10 channel control enables precise programming
  • 2 cm compact board fits standard PAR cans

Replacement Motherboard for LED Par Fixtures

This aluminium-alloy motherboard is a direct replacement for 18x18 W RGBWA+UV LED par cans. It delivers 108 W of output at 24 V and draws 6.5 A. The board measures 7.2 by 6 by 3 cm and supports six- or ten-channel DMX control for professional stage lighting.

Suits Technicians Maintaining Existing RGBWA+UV Pars

The board fits fixtures designed for the 18x18 W RGBWA+UV array and the specified six- or ten-channel protocol. It is not for users needing a different LED count, colour mix, voltage or channel configuration. Buyers who want more channels, higher wattage or a different form factor should look elsewhere.

Check Fixture Compatibility Before Ordering

Verify that your par can accepts a 7.2 by 6 by 3 cm board with the same mounting points. Confirm the fixture runs on 24 V DC and can supply 6.5 A continuously. Ensure the existing DMX wiring matches the six- or ten-channel layout and that the colour order matches RGBWA+UV.

Highlights

  • RGBWA+UV colour mixing expands creative options
  • 18 x 18 W LEDs deliver 108 W output
  • 24 V 6.5 A power draw suits professional rigs
  • DMX 6/10 channel control enables precise programming
  • 2 cm compact board fits standard PAR cans

Specifications

Type6 VOLT

Questions about this item

What fixture housing and DMX controller are needed to run this 108 W motherboard?

It fits an 18 × 18 W RGBWA+UV LED par can and requires a DMX controller that supports 6 or 10 channels at 24 V.

Will the 6/10-channel DMX mode work with my existing 4/8-channel RGBW par cans?

The board uses CH6/10 for RGBWA+UV; older RGBW cans use CH4/8, so they cannot share the same DMX addressing.

How do I confirm the board is drawing the rated 6.5 A at 24 V after installation?

Measure the supply current with a multimeter; a steady 6.5 A reading at 24 V shows the 108 W board is operating normally.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.