Hetai Tech
Hetai Tech Flash CF to 1.8" IDE 50 Pin Converter Adapter
Converts a CompactFlash card to a 1.8-inch 50-pin IDE drive interface
- Changer TypeUSB to DB9 (RS-232)
- Converts CompactFlash to 1.8" 50-pin IDE interface
- Enables legacy 1.8-inch drive integration via 50-pin connector
- RS-232 serial connectivity through DB9 interface
- Flexible cable length options available on request
CF to 1.8" IDE 50 Pin Adapter
This converter connects a CompactFlash card to a 1.8 inch IDE 50 pin interface. It suits technicians who need to read legacy storage in embedded or industrial systems.
Passive design with no active cooling
The adapter has no fan or heatsink, so it adds no noise and draws negligible power from the host bus. Builds that require forced airflow or a dedicated power rail are not the intended use case.
Highlights
- Converts CompactFlash to 1.8" 50-pin IDE interface
- Enables legacy 1.8-inch drive integration via 50-pin connector
- RS-232 serial connectivity through DB9 interface
- Flexible cable length options available on request
Specifications
| Changer Type | USB to DB9 (RS-232) |
|---|
Questions about this item
How is the 50-pin connector seated on the 1.8" IDE drive and what step is often missed?
Align pin 1 with the keyed notch on the drive header and press the riser card straight down until the latch clicks; the common mistake is inserting it offset by one row.
What maintenance will the CF-to-IDE adapter need over time?
The solid-state CF card has no moving parts, so only periodic contact cleaning with isopropyl alcohol is recommended; no scheduled replacement is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



