We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black ABS front-panel card reader with multiple slots and USB 3.0 3.1 eSATA Type-C ports

Hetai Tech

Hetai Tech 8-in-1 Internal Card Reader Front Panel USB 3.0 3.1 eSATA Type-C

SKU CH-CF16-FVAVY

An 8-in-1 internal front-panel hub reads SD, CF, TF, SDHC, MMC, SDXC and MD cards while adding USB 3.0, USB 3.1 and eSATA ports plus a Type-C connector

  • Type8-in-1
  • Read multiple card formats with one internal 8-in-1 reader
  • Transfer data via USB 3.0, 3.1 and eSATA ports
  • Mount in a standard 5.25" front-panel bay for easy access
  • Compact ABS chassis measures 14.7 x 7.7 x 4 cm
  • Supports SD, CF, TF, SDHC, MMC, SDXC and MD cards

8-in-1 Internal Card Reader

The Hetai Tech front-panel unit adds SD, CF, TF, SDHC, MMC, SDXC and MD card slots to a desktop PC. It mounts in a standard drive bay and connects through USB 3.0, USB 3.1 and eSATA headers on the motherboard. The ABS housing fits a 14.7cm by 7.7cm by 4cm cut-out.

Sustained transfer through eSATA and USB 3.1

Large batches of RAW photos or video clips move at the host controller’s native rate without the throttling seen on USB 2.0 hubs. The internal wiring keeps signal paths short, so sequential writes hold steady across full card capacities. Thermal load stays low because the reader draws power only during active transfers.

Replaces single-slot readers and external dongles

Builders who now juggle multiple adapters gain one bay device that handles every common format. The jump is worth it when a workflow touches SD, CF and microSD cards in the same session. Users who only ever read one card type will not need the extra slots.

Highlights

  • Read multiple card formats with one internal 8-in-1 reader
  • Transfer data via USB 3.0, 3.1 and eSATA ports
  • Mount in a standard 5.25" front-panel bay for easy access
  • Compact ABS chassis measures 14.7 x 7.7 x 4 cm
  • Supports SD, CF, TF, SDHC, MMC, SDXC and MD cards

Specifications

Type8-in-1

Questions about this item

How much heat or noise does the Hetai Tech 8-in-1 internal card reader produce when running all day?

The unit has no fan or moving parts, so it runs silently and adds negligible heat inside the case.

Which cables or headers must my motherboard already provide for the Hetai Tech 8-in-1 reader to work?

You need a free USB 3.0 or 3.1 internal header plus an eSATA port on the motherboard or add-in card.

Will the Hetai Tech 8-in-1 reader fit alongside my existing 5.25-inch optical drive?

The reader measures 14.7 cm x 7.7 cm x 4 cm, so check that your case has an adjacent 5.25-inch bay with that clearance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.