We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white card reader with Lightning plug, USB-A port, SD and microSD slots, and extra Lightning charging port

Hetai Tech

Hetai Tech 8-in-1 Card Reader USB 2.0 Lightning iOS 10 12

SKU CH-WPYW-2FW7P

Reads SD and microSD cards via Lightning on iOS 10 to 12 with USB 2.0 at 14 MB/s to 16 MB/s

  • Type8-in-1
  • Transfer photos fast at 14-16 MB/s USB 2.0 speed
  • Read SD and Micro SD cards up to 1 TB capacity
  • Plug in and use instantly with no app needed
  • Works with iOS 10 and 12 on listed iPhone and iPad models
  • Charge your device while transferring via Lightning pass-through port

8-in-1 Lightning card reader for iOS 10 to 12

This 8-in-1 reader adds a USB 2.0 female port, an SD card slot, a Micro SD slot and a female 8-pin charging port to compatible iPhone and iPad models. It is intended for photographers and field workers who need to offload images directly from SD or Micro SD media without a computer. The adapter works with iOS 10 through 12 and the listed iPhone and iPad models; it does not support iOS 13 or later devices. Buyers using newer iOS versions or Android devices cannot use this reader.

USB 2.0 transfer rates and 100 mA accessory limit

Data moves at 14 to 16 MB/s over the USB 2.0 interface, suitable for transferring JPEG, RAW and HEIF/HEVC files from cards up to 1 TB. The Lightning charging port lets the host device stay powered while the reader is attached. Connected accessories such as keyboards, hubs, Ethernet adapters, audio or MIDI interfaces must draw 100 mA or less, otherwise the iOS device will reject the connection. No active cooling or external power supply is involved.

Plug-and-play operation with no app required

The reader functions immediately on supported iOS versions — no driver installation or companion application is needed. Standard photo formats including JPEG, RAW and HEIF/HEVC are recognised by the system Photos app. The female 8-pin port passes through charging current so the iPhone or iPad can charge while files are copied. The USB 2.0 female port expands connectivity to low-power peripherals such as keyboards or wired Ethernet adapters within the 100 mA limit.

Highlights

  • Transfer photos fast at 14-16 MB/s USB 2.0 speed
  • Read SD and Micro SD cards up to 1 TB capacity
  • Plug in and use instantly with no app needed
  • Works with iOS 10 and 12 on listed iPhone and iPad models
  • Charge your device while transferring via Lightning pass-through port

Specifications

Type8-in-1

Questions about this item

How do I install the Hetai Tech 8-in-1 Card Reader on my iPhone, and what step do people often miss?

Plug the Lightning connector into your iPhone running iOS 10 or 12, insert an SD or TF card up to 1 TB, and open the Photos app to import. The step people miss is checking that any attached USB accessory draws 100 mA or less, otherwise the device will pop up an error.

What maintenance or replacement will this card reader need later?

No routine maintenance is required. Keep the Lightning plug and card slots free of dust. If the connector wears out or the USB 2.0 port stops recognising cards, replace the whole adapter.

What limit appears first when I transfer large batches of photos continuously?

The USB 2.0 interface caps sustained transfer at 14 MB/s to 16 MB/s, so that throughput ceiling is reached before any card capacity limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.