We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black cable with a wide 22-pin connector on one end and two standard USB-A plugs on the other

HETAI Digital Technology Co.,Ltd

HETAI Digital Technology Co.,Ltd Dual USB 3.0 22 Pin Hard Drive Cable 30 cm

SKU CH-Z46B-9680P

Connects a 2.5 inch HDD or SSD to a USB 3.0 port using a 22-pin dual USB power cable with JMS578 chip for 5 Gbps transfer

  • Connector TypeMicro USB to USB A
  • Connect 2.5″ drives to a USB 3.0 port for 5 Gbps transfers
  • Dual USB power feeds 7200 rpm drives without an external adapter
  • JMS578 controller keeps the link stable and backward compatible
  • Hot-swap support lets you change drives without rebooting
  • 30 cm main cable plus 10 cm secondary lead fits tight spaces

Dual USB 3.0 22-Pin Cable for 2.5" Drives

This 30 cm cable connects a 2.5 inch HDD or SSD to a computer using two USB-A plugs for power and a 22-pin micro-USB device connector. The JMS578 bridge enables USB 3.0 speeds up to 5 Gbps while remaining backward compatible with USB 2.0 and 1.1 hosts. Hot-swap support and plug-and-play operation mean no driver installation is required on Windows 2000 through modern macOS.

Suits Portable 2.5" Drive Access.

The dual-USB power design can run high-speed 7 200 rpm 2.5 inch drives without an external adapter, making it useful for laptop users who need quick data recovery or drive cloning on the go. Builders wanting to power a 3.5 inch desktop drive, or anyone needing a permanent internal connection, should look elsewhere because the cable only supports 2.5 inch form factors and draws all current from the host ports.

22-Pin Micro-USB Device Connector Decides

The drive end uses a 22-pin micro-USB plug that matches the native interface on compatible 2.5 inch HDDs and SSDs; if the drive presents a different pin arrangement this cable cannot attach. The 30 cm main lead plus a 10 cm secondary power tail keep the setup compact for travel, while the copper conductors and plastic moulding weigh just 37 g.

Highlights

  • Connect 2.5″ drives to a USB 3.0 port for 5 Gbps transfers
  • Dual USB power feeds 7200 rpm drives without an external adapter
  • JMS578 controller keeps the link stable and backward compatible
  • Hot-swap support lets you change drives without rebooting
  • 30 cm main cable plus 10 cm secondary lead fits tight spaces

Specifications

Connector TypeMicro USB to USB A

Questions about this item

How much heat or noise does the JMS578 chip generate when the cable runs all day?

The JMS578 controller draws power from two USB-A ports and runs without a fan, so it produces no audible noise and only modest warmth during continuous use.

Which ports must my computer already have to use the dual USB-A power design?

Two free USB-A sockets are required — one for data and the secondary 10 cm lead for extra current — otherwise the 2.5 inch drive may not spin up reliably.

Will the 5 Gbps USB 3.0 link still operate at full speed if I plug it into an older USB 2.0 port?

The cable is backward compatible with USB 2.0 and 1.1, but the transfer rate will drop to the host port’s maximum instead of the rated 5 Gbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.