Hellwig
Hellwig 7883 Lifted Rear Sway Bar Kit for Dodge Ram 1500 4x4 2009-2015
Rear sway-bar kit for lifted 2009-2015 Dodge Ram 1500 4x4 trucks adds adjustable anti-roll stiffness with solid chromoly arms and bolt-on installation
- TypeKeepsakes
- Reduced body roll on lifted trucks
- 7/8" heat-treated chromoly steel construction
- Adjustable end links for precise fitment
- Three arm holes enable rate tuning
- Direct bolt-on install with no drilling
Lifted Rear Sway Bar Kit for Ram 1500 4x4
The Hellwig 7883 kit is a lifted-specific rear sway bar built for 2009-2015 Dodge Ram 1500 4x4 trucks carrying a 2-4 inch rear lift. It uses heat-treated, solid chromoly steel bar stock measuring 7/8 inch in diameter. Adjustable end links and three arm mounting holes let the installer tune the roll rate to match load and driving style. All hardware is included for a direct bolt-on installation with no drilling or welding required.
Suited for lifted 1500 4x4 owners needing roll
This kit targets owners of 2009-2015 Ram 1500 4x4 models who have added a rear lift and want to restore stability lost to a higher centre of gravity. It benefits daily drivers and tow vehicles alike by increasing anti-roll stiffness. Buyers with two-wheel-drive trucks or non-lifted suspensions cannot use this kit. It also does not fit heavier-duty Ram models or model years outside the stated range.
2-4 inch rear lift compatibility
The single specification that decides fitment is the rear lift height of 2-4 inches. The bar geometry and end-link length are engineered specifically for that lift window on the 2009-2015 Ram 1500 4x4 platform. A lift outside this range will prevent correct installation and proper sway bar function. Verify the actual rear lift measurement before ordering.
Highlights
- Reduced body roll on lifted trucks
- 7/8" heat-treated chromoly steel construction
- Adjustable end links for precise fitment
- Three arm holes enable rate tuning
- Direct bolt-on install with no drilling
Specifications
| Type | Keepsakes |
|---|
Questions about this item
Will the 7883 kit bolt onto my stock 2009-2015 Dodge Ram 1500 4x4 suspension without extra parts?
Yes, the kit is a direct bolt-on design that includes every component needed for installation, so no additional brackets or hardware are required.
Does the 7/8-inch chromoly bar work with the factory rear end links on a lifted Ram 1500?
The kit supplies its own adjustable end links, which replace the factory pieces and are sized for the 2-4 inch rear lift range.
How can I confirm the sway bar is reducing body roll after I install it?
Drive the truck through a corner or lane change at moderate speed; the rear should feel flatter and more controlled compared with the pre-install behaviour.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
