We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Heil PR40 dynamic microphone with shockmount, boom arm and XLR cable

Heil Sound

Heil Sound PR40 Large Diaphragm Dynamic Cardioid Microphone Bundle with Shockmount, Boom Mount, XLR Cable

SKU CH-A6T0-6N97X

Large-diaphragm dynamic cardioid microphone covering 28 Hz to 18 kHz with -40 dB rear rejection, bundled with shockmount, boom mount and XLR cable

  • Widest frequency range in the PR series from 28 Hz to 18 kHz
  • Cardioid polar pattern with -40 dB rear rejection at 180 degrees off-axis
  • Large low-mass diaphragm shock-mounted and de-coupled from the steel body
  • Dual mesh screens plus internal breath blast filter eliminate popping on vocals
  • Bundle includes PRSMB shockmount, PL2T overhead boom mount and XLR cable

Studio microphone for broadcast

The Heil Sound PR40 is a large diaphragm dynamic cardioid microphone designed for professional voice, drum and guitar cabinet recording. Its wide 28 Hz to 18 kHz frequency response captures deep lows and detailed highs without a separate condenser. The bundle includes a shockmount, overhead boom mount and XLR cable for immediate setup.

Upgrade from entry-level dynamics

This kit replaces narrower-range dynamics that roll off below 40 Hz or lack the rear rejection needed for noisy stages. The -40 dB rejection at 180 degrees off axis makes the jump worthwhile when bleed from monitors or adjacent instruments ruins takes. The internal blast filter and dual mesh screens remove the need for an external pop shield.

Consistent output during long sessions without

The diaphragm is shock mounted and fully decoupled from the steel body, so handling noise stays low even when the boom is repositioned mid-session. Cardioid response remains flat across the full 28 Hz to 18 kHz range, preventing low-frequency build-up when speakers work close to the grille. Dynamic operation means no phantom power requirement and stable performance over hours of use.

Highlights

  • Widest frequency range in the PR series from 28 Hz to 18 kHz
  • Cardioid polar pattern with -40 dB rear rejection at 180 degrees off-axis
  • Large low-mass diaphragm shock-mounted and de-coupled from the steel body
  • Dual mesh screens plus internal breath blast filter eliminate popping on vocals
  • Bundle includes PRSMB shockmount, PL2T overhead boom mount and XLR cable

Specifications

No published specifications for this item yet.

Questions about this item

Does the included shockmount attach directly to the PL2T boom mount?

The PRSMB shockmount is designed for the PR40 and fits the PL2T boom’s standard microphone thread, so no adapter is required.

How should I route the XLR cable along the boom arm to avoid noise?

Run the cable inside the PL2T’s internal channel or secure it with the supplied velcro wraps, keeping slack away from the spring mechanism to prevent handling noise.

What parts of the bundle are most likely to wear out first?

The XLR cable connectors and the shockmount’s elastic bands are the typical wear items; the dynamic capsule itself is built for long‑term use without replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.