HAYWARD POOL PRODUCTS INC
HAYWARD POOL PRODUCTS INC YS10300T 3" Threaded PVC Y Strainer 150 psi dispenser
A 3-inch threaded PVC Y-strainer rated for 150 psi with a 61.43 sq in screen area and 1/8 in mesh
- TypeNew
- Handles demanding flow with 150 psi pressure rating
- Fits 3-inch threaded PVC piping for direct installation
- Large 61.43 sq in screen area captures more debris
- Durable PVC housing with FPM gasket resists chemical corrosion
- Compact 9 19/32 in height suits tight equipment pads
3-inch threaded PVC Y strainer for pool plumbing
The Hayward YS10300T is a 3-inch threaded PVC Y strainer rated for 150 psi working pressure. It fits standard pool circulation lines where debris removal is required before pumps or heaters. The housing and screen are both PVC with a 1/8 inch mesh opening. An FPM gasket seals the cover against the body.
61.43 square inch screen area
The 61.43 sq in screen area provides high dirt-holding capacity so cleaning intervals stay long. A full-size 3-inch blow-off port lets you flush captured debris without disassembling the strainer. The threaded connections allow direct installation into existing PVC pipe networks without extra adapters.
150 psi pressure rating decides suitability
The 150 psi maximum pressure rating is the single figure that determines whether this strainer matches your system design. Verify that your pump curve and static head never exceed this limit before specifying the part.
Highlights
- Handles demanding flow with 150 psi pressure rating
- Fits 3-inch threaded PVC piping for direct installation
- Large 61.43 sq in screen area captures more debris
- Durable PVC housing with FPM gasket resists chemical corrosion
- Compact 9 19/32 in height suits tight equipment pads
Specifications
| Brand | Hayward |
|---|---|
| Type | New |
Questions about this item
How often will the 1/8 in mesh PVC screen need cleaning or replacement?
The 61.43 sq in screen area and 1/8 in mesh PVC screen capture debris; cleaning frequency depends on water quality and flow volume, with the FPM gasket allowing easy removal for maintenance.
What pressure limit appears first during continuous operation?
The housing is rated for a maximum of 150 psi; sustained pressure at or above this level is the primary limit for the PVC body and threaded connections.
How much heat or noise does the strainer generate when water runs all day?
As a passive PVC Y-strainer with no moving parts, it produces no noise and negligible heat; only fluid friction in the 3 in threaded ports affects temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



