We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC Y-pattern check valve with dual 2-inch socket connections

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC YC10200S 2" Socket PVC Y Check Valve

SKU CH-ZHB1-589KM MPN YC10200S

A 2-inch PVC Y-pattern check valve with socket connections, 1.000 psi cracking pressure and FPM seals for horizontal or vertical mounting

  • TypeDrain Components
  • MaterialHAWA
  • Prevents backflow with Y-pattern single-flow design
  • Handles up to 150 psi water pressure at 70°F
  • Operates reliably from 40°F to 140°F
  • Durable PVC body with FPM seals resists corrosion
  • Installs horizontally or vertically via 2" socket connections

Pool Check Valve for 2-Inch PVC Systems

The Hayward YC10200S is a Y-pattern check valve built from PVC with FPM seals for pool and spa plumbing. It fits 2-inch socket connections and operates in horizontal or vertical runs. The design allows flow in one direction while preventing backflow when the pump shuts off.

PVC Body with Socket Mounting for Direct Solvent

The valve body uses PVC rated to 150 psi at 70 degrees F and handles water temperatures from 40 to 140 degrees F. Socket ends accept standard 2-inch PVC pipe for permanent solvent-weld installation. A cracking pressure of 1.000 psi keeps the valve closed until forward flow overcomes the spring force.

No Accessories or Software Included

The package contains only the valve body with internal spring and seal components. No unions, glue, primer or control electronics are supplied. Installers must provide compatible PVC pipe, solvent cement and any required support brackets separately.

Highlights

  • Prevents backflow with Y-pattern single-flow design
  • Handles up to 150 psi water pressure at 70°F
  • Operates reliably from 40°F to 140°F
  • Durable PVC body with FPM seals resists corrosion
  • Installs horizontally or vertically via 2" socket connections

Specifications

TypeDrain Components
MaterialHAWA
BrandHayward
ModelYC10200S

Questions about this item

What does the 1.000 psi cracking pressure mean for flow through this Y check valve?

The valve begins to open when upstream pressure exceeds 1.000 psi, allowing flow in one direction while preventing backflow.

What pipe size and connection type does the 2" socket PVC valve require?

It fits 2 inch Schedule 40 PVC pipe with solvent-weld socket connections on both ends.

How should the valve be oriented during installation to avoid the common mistake?

Install with the Y-pattern body horizontal or vertical as marked; the arrow must point in the actual flow direction, not simply upward.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.