We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC Y-pattern check valve with socket ends

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC YC10100S 1" Socket PVC Y Check Valve trap

SKU CH-MDB3-NX6NT MPN YC10100S

One-inch PVC Y-pattern check valve with socket connections, rated for 9 gpm flow and 150 psi at 70 degrees F

  • TypeDrain Components
  • Prevents backflow with Y-pattern check valve design
  • Handles 9 gpm full flow through 1" socket connections
  • Operates reliably from 40 to 140 degrees F
  • Withstands 150 psi water pressure at 70 degrees F
  • FPM seals resist chemical wear for long service life

Pool check valve with Y-pattern body

The Hayward YC10100S is a one-inch socket PVC check valve designed for horizontal or vertical mounting in pool and spa plumbing. Its Y-pattern body allows full flow with a low one psi cracking pressure, making it suitable for circulation lines where backflow prevention is required.

Simple solvent-weld installation

The valve uses socket connections on both ends, so it is solvent-welded directly into Schedule 40 PVC pipe without threading or flanges. The only common issue is applying too much cement, which can restrict the internal seat, and failing to support the pipe on each side, which stresses the joint over time.

Rated for 150 psi at 70 Degrees F

The maximum working pressure of 150 psi at 70 Degrees F is the single figure that determines whether this valve matches your system design; it also operates between 40 and 140 Degrees F with an FPM seal and delivers nine gpm at full flow.

Highlights

  • Prevents backflow with Y-pattern check valve design
  • Handles 9 gpm full flow through 1" socket connections
  • Operates reliably from 40 to 140 degrees F
  • Withstands 150 psi water pressure at 70 degrees F
  • FPM seals resist chemical wear for long service life

Specifications

TypeDrain Components
BrandHayward
ModelYC10100S

Questions about this item

How can I verify the valve is operating correctly after installation?

With the pump running, confirm water moves freely in the intended direction and that no back-flow occurs when the pump stops; the valve should open at roughly 1 psi cracking pressure.

What comes in the box and what extra parts are needed?

The box contains the 1" socket PVC Y check valve only; you will need PVC pipe, primer and solvent cement to make the socket connections.

Which version should I choose for a horizontal or vertical run?

The YC10100S is rated for both horizontal and vertical mounting, so a single model covers either orientation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.