HAYWARD POOL PRODUCTS INC
HAYWARD POOL PRODUCTS INC TC2300S 3 in Socket CPVC Check Valve
A 3-inch CPVC inline check valve with Viton seals, 3.0 psi cracking pressure and 150 gpm full flow for vertical installation
- TypeDrain Components
- MaterialHAWA
- Prevents backflow with 3.0 psi cracking pressure
- Handles hot water up to 190 Degrees F
- CPVC body resists corrosion in pool systems
- True union socket connections simplify maintenance
- Rated for 150 psi at 70 Degrees F
3-inch CPVC Check Valve for Pool Plumbing
This Hayward TC2300S is an inline true-union check valve built from CPVC with Viton seals. It handles flow in a single direction at up to 150 gpm and a cracking pressure of 3.0 psi. The socket-by-socket connections suit 3-inch pipe in pool and spa circulation systems.
Verify Pipe Size and Pressure Before Fitting
Confirm the existing line uses 3-inch CPVC pipe with solvent-weld sockets. The valve is rated for 150 psi at 70 degrees F and operates between 40 and 190 degrees F. It must be mounted vertically and is not rated for steam service.
Replaces Worn Swing or Spring Check Valves
Swap out a failing swing check or spring-loaded valve when backflow prevention becomes unreliable. The true-union body allows removal without cutting pipe, making the change worthwhile during scheduled filter or pump maintenance.
Highlights
- Prevents backflow with 3.0 psi cracking pressure
- Handles hot water up to 190 Degrees F
- CPVC body resists corrosion in pool systems
- True union socket connections simplify maintenance
- Rated for 150 psi at 70 Degrees F
Specifications
| Type | Drain Components |
|---|---|
| Material | HAWA |
| Brand | Hayward |
| Model | TC2300S |
Questions about this item
Does the TC2300S check valve come with solvent cement or primer, or do I need to buy them separately?
The valve is supplied as a bare CPVC body with socket ends; solvent cement and primer for the socket joints are not included and must be purchased separately.
Should I choose a different cracking-pressure version for a vertical pool return line?
This model has a fixed 3.0 psi cracking pressure and is rated for vertical mounting, so no alternative version is offered for that orientation.
What does the 150 gpm full-flow rating mean when the valve is installed in a 3-inch CPVC line?
At the rated 150 psi and 70 °F water temperature, the valve will pass up to 150 gallons per minute without restricting the line.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



