We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White CPVC inline check valve with FNPT and socket ends

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC TC20125ST 1-1/4" FNPT Socket CPVC Check Valve trap

SKU CH-VMW3-VHEK9 MPN TC20125ST

A 1-1/4 inch FNPT socket CPVC check valve for vertical drain lines, rated 30 gpm flow with Viton seals and a 3 psi cracking pressure

  • TypeDrain Components
  • MaterialHAWA
  • Prevents backflow with inline true union design
  • Handles up to 235 psi water pressure at 70°F
  • Operates from 40°F to 190°F temperature range
  • Delivers 30 gpm full flow capacity
  • Viton seals resist chemical degradation

Hayward CPVC Check Valve 1-1/4

The Hayward TC20125ST is a true-union inline check valve built from CPVC with Viton seals. It suits pool and spa plumbing where a reliable non-return device is required. The FNPT-by-socket connections allow straightforward integration into 1-1/4 inch piping systems.

Thermal pressure limits and flow

The valve operates between 40 and 190 degrees Fahrenheit and withstands 235 psi water pressure at 70 degrees Fahrenheit. A cracking pressure of 3 psi ensures positive sealing without excessive restriction. Full-flow design delivers 30 gpm with minimal turbulence or noise in normal circulation.

Vertical mounting requirement

This check valve must be installed in a vertical orientation to function correctly. Horizontal or inverted installations will prevent the mechanism from opening and closing reliably. Verify piping layout accommodates vertical placement before purchase.

Highlights

  • Prevents backflow with inline true union design
  • Handles up to 235 psi water pressure at 70°F
  • Operates from 40°F to 190°F temperature range
  • Delivers 30 gpm full flow capacity
  • Viton seals resist chemical degradation

Specifications

TypeDrain Components
MaterialHAWA
BrandHayward
ModelTC20125ST

Questions about this item

How do I install the TC20125ST check valve with its FNPT x Socket connections and which orientation step is often missed?

Apply CPVC solvent cement to the socket end and thread sealant to the 1-1/4" FNPT end, then install with the flow arrow pointing vertically upward as required by the vertical mounting orientation.

Which seals on the TC20125ST will need replacement over time and what temperature range do they handle?

The Viton seat and seal handles 40 to 190 Degrees F; plan to replace them if they harden or leak after prolonged exposure to chlorinated water near the upper limit.

At what pressure does the TC20125ST reach its limit first during sustained flow at 70 Degrees F?

The 235 psi maximum water pressure rating at 70 Degrees F is the limiting factor; sustained operation above this pressure risks valve failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.