We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC butterfly valve with black lever handle, wafer style, six inch pipe size

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BYV11060A0EL000 Butterfly Valve 6in Lever

SKU CH-3XBD-8Q201

Wafer-style PVC butterfly valve with EPDM liner and lever handle for 6-inch piping up to 150 psi

  • TypeOther
  • PVC body resists corrosion for long service life
  • 150 psi rating handles high-pressure pool plumbing
  • EPDM liner seals reliably from 32 to 140 °F
  • Lever handle gives quick manual flow control
  • Meets ISO 5211 and ASTM D1784 Cell Class 12454 standards

6 in PVC Butterfly Valve

This wafer-style butterfly valve controls flow in 6-inch piping systems using a PVC body and EPDM liner. It is built for pool, spa and water-treatment circuits that require chemical-resistant shut-off. The lever handle provides direct manual operation without the need for actuation equipment. The valve meets ISO 5211 mounting dimensions for standard hardware compatibility.

Upgrade from worn gate or ball valves

Replace older metal or cracked plastic valves when leaks appear at the stem or seat. The jump is worth it when the system operates up to 150 psi and between 32 and 140 degrees F, where PVC and EPDM maintain seal integrity. The ASTM D1784 cell class 12454 rating confirms material suitability for pressurised water service. Avoid this valve if the line requires automated actuation or a different flange pattern.

Simple bolt-on installation

Align the eight bolt holes on the 9 1/2 inch bolt circle with the mating flanges and tighten in a cross pattern to 7/8 inch lug diameter specifications. The wafer body slips between flanges without extra gaskets when surfaces are clean and flat. Common issues include uneven flange faces that pinch the liner and over-torqued bolts that distort the PVC body. Verify ISO 5211 top-work dimensions before mounting any operator.

Highlights

  • PVC body resists corrosion for long service life
  • 150 psi rating handles high-pressure pool plumbing
  • EPDM liner seals reliably from 32 to 140 °F
  • Lever handle gives quick manual flow control
  • Meets ISO 5211 and ASTM D1784 Cell Class 12454 standards

Specifications

BrandHAYWARD
TypeOther

Questions about this item

What bolt pattern and lug size does the 6 in wafer valve need for mounting?

The valve has 8 bolt holes on a 9 1/2 in bolt circle and uses 7/8 in lugs.

Which step is often missed when installing the lever handle on the PVC disc?

Align the handle with the disc flats before tightening the set screw so the lever position matches the open and closed ports.

When should the EPDM liner be inspected or replaced on this valve?

Inspect the liner if the valve sees temperatures near 140 Degrees F or pressures approaching 150 psi; replace it at the first sign of cracking or leakage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.