HAYWARD POOL PRODUCTS INC BFAS2010CES Bulkhead Fitting 1 in CPVC EPDM 150 psi 190 Degrees F

Pool Bulkhead Fitting 1 in CPVC

The Hayward BFAS2010CES is a bulkhead tank fitting made from CPVC with an EPDM gasket for chemical-resistant sealing. It suits pool and spa plumbing installations on curved or flat tank walls where a 1-inch threaded female interior and 1-inch socket female exterior are required. The light-grey body identifies it for standard chlorinated or salt-water systems.

Pressure Rating 150 psi Temperature Range 40

Rated for a maximum operating pressure of 150 psi, the fitting handles typical circulation pump loads and filter backwash surges in residential pools. It remains functional from 40 F up to 190 F, covering cold-start winterisation through to solar-heated water temperatures. The design has no bolt holes, so it relies on the threaded engagement and gasket compression alone.

Thermals Noise and Power Draw

As a static plumbing component the fitting generates no noise and draws no electrical power during normal operation. CPVC material conducts minimal heat, so the fitting surface stays close to the water temperature without creating a thermal bridge. The EPDM gasket maintains its seal across the full 40 to 190 F range without hardening or extruding under the 150 psi pressure limit.