HAYWARD POOL PRODUCTS INC
HAYWARD POOL PRODUCTS INC BFAS2005CES Bulkhead Fitting 1/2 in CPVC EPDM 150 psi 190°F
CPVC bulkhead fitting with EPDM gasket rated 150 psi and 190 °F for curved or flat tanks
- TypeDrain Components
- MaterialHAWA
- ColorLight Gray
- CPVC body resists chemical corrosion for long tank life
- EPDM gasket seals reliably from 40 to 190 °F
- 150 psi rating handles demanding pressure loads
- 1/2 in female threads inside and socket outside simplify plumbing
- Light gray finish identifies the fitting at a glance
Tank Bulkhead Fitting
The Hayward BFAS2005CES is a CPVC bulkhead fitting designed to create a sealed penetration through curved or flat tank walls. It suits pool, spa, and industrial fluid systems that require a reliable 1/2 inch connection point.
Pressure and Temperature Range
Rated for 150 psi at 190 °F, the fitting handles typical circulation and heating loops with ample headroom. The lower limit of 40 °F means it is not intended for continuous sub-freezing service without additional protection.
CPVC Material with EPDM Gasket
The CPVC body and EPDM gasket determine chemical compatibility and service life. Installers must verify that the process fluid is compatible with both materials before specifying this part.
Highlights
- CPVC body resists chemical corrosion for long tank life
- EPDM gasket seals reliably from 40 to 190 °F
- 150 psi rating handles demanding pressure loads
- 1/2 in female threads inside and socket outside simplify plumbing
- Light gray finish identifies the fitting at a glance
Specifications
| Type | Drain Components |
|---|---|
| Material | HAWA |
| Color | Light Gray |
| Brand | Hayward |
| Model | BFAS2005CES |
Questions about this item
Will the 1/2 in threaded and socket connections on this bulkhead fitting join directly to my existing CPVC piping?
Yes, the fitting provides a 1/2 in female threaded connection on the inside and a 1/2 in female socket connection on the outside, both sized for standard CPVC pipe.
How can I verify the EPDM gasket is sealing correctly once the fitting is installed on the tank?
Pressurise the system up to 150 psi and inspect the gasket area; no visible leakage confirms the seal is functioning as intended.
Does the package include any additional gaskets, bolts or solvent cement for installation?
The box contains the bulkhead fitting with its EPDM gasket only; solvent cement, thread sealant and any mounting hardware must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



