We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray PVC bulkhead fitting with female threaded connections on both sides

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFAS1020TES 2" Bulkhead Trap FNPT x FNPT

SKU CH-59TF-FPMMA MPN BFAS1020TES

PVC bulkhead trap with EPDM gasket, rated 150 psi at 70 Degrees F, operating 40 to 140 Degrees F

  • TypeDrain Components
  • MaterialHAWA
  • ColorGray
  • Reliable seal with EPDM gasket material
  • Handles up to 150 psi at 70 degrees F
  • Operates from 40 to 140 degrees F
  • Female threaded connections on both sides
  • Durable PVC construction in gray finish

2" Bulkhead Trap FNPT x FNPT

This Hayward bulkhead trap provides a 2-inch threaded connection on both the tank and pipe sides. The grey PVC fitting uses an EPDM gasket to seal curved or flat tank walls without bolt holes. It is built for pool and spa plumbing where a secure drain or bulkhead pass-through is required.

Suits pool and spa installations.

Installers needing a 2-inch female threaded bulkhead for water circulation will find this fitting matches the tank and pipe size. The 150 psi rating at 70 degrees F limits use to standard pool pressures. Buyers who need higher pressure ratings, different connection sizes, or bolted flange mounting should look at other fittings.

150 psi at 70 degrees F maximum operating pressure

The fitting handles up to 150 psi at 70 degrees F and operates between 40 and 140 degrees F. This pressure and temperature range decides whether the trap matches the system design. Verify the plumbing pressure and temperature against these limits before selecting the part.

Highlights

  • Reliable seal with EPDM gasket material
  • Handles up to 150 psi at 70 degrees F
  • Operates from 40 to 140 degrees F
  • Female threaded connections on both sides
  • Durable PVC construction in gray finish

Specifications

TypeDrain Components
MaterialHAWA
ColorGray
BrandHayward
ModelBFAS1020TES

Questions about this item

What size FNPT threads must the existing tank openings have to accept this 2" bulkhead fitting?

Both the inside and outside connections are 2" FNPT threaded, so the tank openings need matching 2" female NPT threads.

Will the EPDM gasket hold up if the system runs at 140°F and 150 psi?

Yes, the fitting is rated for a maximum operating temperature of 140°F and a maximum pressure of 150 psi at 70°F.

After installation, how can I confirm the bulkhead is sealed and operating within its 40–140°F range?

Pressurise the line up to 150 psi, check for leaks at the gasket and threads, and verify the fluid temperature stays between 40°F and 140°F during operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.