We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray PVC bulkhead fitting with threaded and socket ends

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFAS1015CFS 1-1/2" Bulkhead Fitting FNPT x Socket trap

SKU CH-AJXD-CPE87 MPN BFAS1015CFS

A 1-1/2 inch bulkhead fitting connects FNPT threads to a socket joint for curved or flat tanks

  • TypeDrain Components
  • MaterialHAWA
  • ColorGray
  • Handles up to 150 psi at 70°F for secure tank connections
  • FKM gasket resists chemicals across 40°F to 140°F range
  • 1-1/2 inch FNPT threaded inside connection fits standard pipe threads
  • 1-1/2 inch socket outside connection allows direct solvent-weld installation
  • Gray PVC body suits curved or flat tank surfaces without bolt holes

Hayward 1-1/2" Bulkhead Fitting

This Hayward bulkhead fitting connects pipework through tank walls in pool and spa plumbing systems. It accepts 1-1/2 inch female NPT threads on the inside and a 1-1/2 inch socket connection on the outside. The gray PVC body and FKM gasket suit curved or flat tank surfaces. It is rated for 150 psi at 70 Degrees F.

Installation notes

The fitting threads into a cut opening and the socket end is solvent-welded to standard PVC pipe. Use compatible primer and cement for the socket joint and thread sealant on the NPT side. Over-tightening the threaded connection can stress the PVC body. Ensure the FKM gasket seats evenly to prevent leaks at the tank wall.

Before ordering

Verify the tank wall thickness allows full thread engagement for the 1-1/2 inch NPT connection. Confirm the system operating pressure stays within the 150 psi rating at 70 Degrees F. Check that the fluid temperature remains between 40 and 140 Degrees F for the FKM gasket. Ensure the piping schedule matches the socket dimensions for a proper solvent weld.

Highlights

  • Handles up to 150 psi at 70°F for secure tank connections
  • FKM gasket resists chemicals across 40°F to 140°F range
  • 1-1/2 inch FNPT threaded inside connection fits standard pipe threads
  • 1-1/2 inch socket outside connection allows direct solvent-weld installation
  • Gray PVC body suits curved or flat tank surfaces without bolt holes

Specifications

TypeDrain Components
MaterialHAWA
ColorGray
BrandHayward
ModelBFAS1015CFS

Questions about this item

How do I confirm the BFAS1015CFS bulkhead fitting is sealing correctly after installation?

Pressurise the system up to 150 psi at 70 °F and check for leaks at the FKM gasket and both the 1-1/2" FNPT and socket connections; no weeping means the fitting is working as intended.

What comes with the BFAS1015CFS and what must I supply separately?

The fitting body and FKM gasket are included; you must provide 1-1/2" schedule 40 PVC pipe for the socket end and a matching 1-1/2" male NPT thread for the inside connection.

Which BFAS1015CFS version suits a tank that sees 140 °F water?

This model is rated to 140 °F maximum operating temperature, so the standard BFAS1015CFS with FKM gasket is the correct choice for that service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.